You are reading a single comment by @larsenroad and its replies.
Click here to read the full conversation.
-
Embarrasing for Dolan :(
-
Show them, send it back to be crimped at their cost
-
This is a known problem with Omniums/PCs. People have experienced similar down the thread.
New colour frame looks great by the way, and I like the way that colour scheme is going. My Dolans are both satin grey, with the same silvery component choices. -
oh dear oh dear
-
Remove spacers or you'll shaft the whole thing. Putting spacers won't let the bearings sit flush on the axle and will pull the DS axle through the bearing. Eventually It'll bind the whole thing or it'll chew away at the splines.
This looks like a Dolan issue really. New frames? The old one doesn't have this issue, at least not on mine.
Thuekr
PhilDAS
Lukas
swedeee
Chak
@larsenroad
New Pre Cursa vs Omnium. I thought I shouldn't even need to use the spacer, but even with, this is extremely tight. Any advice?
1 Attachment