-
This is interesting. Could I in fact use my cannondale cranks in the bb24 with that rotor BB?
I could then just buy the cannondale p2m and praxis chainrings.
How easy is it to swap cannondale cranks in and out?
dancing james-
Could I in fact use my cannondale cranks in the bb24 with that rotor BB?
No, the Cannondale cranks are BB30 (30mm axle, 68mm width across bearings), the Rotor ones are (although they don't admit it) BB386 (30mm axle, 86mm width across bearings)
BB386 cranks use spacers to take up the excess spindle length to allow use in a BB30 shell
-
nope, can only do with Rotor (with BSA30).
-
How easy is it to swap Cannondale cranks in and out?
Compared to pretty much any other modern crank a bit of a faff, frankly. But it doesn't matter anyway because they won't fit your BSA frame. Unless they have made a kinda-bb86 axle and spider PM for the new SuperX (but I suspect they haven't).
gbj_tester
amey
Howard
shit yeah, howard is right. There are more chances of 24mm axle in BB30 creaking than 30mm axle in BSA shell (with Rotor BSA30).