You are reading a single comment by @PhilDAS and its replies.
Click here to read the full conversation.
-
Yes they do by about 2mm. The last cog on the cassette is definitely closer to the dropout than it is on my other housemates caad though he's using SRAM on fulcrums. But I thought fulcrum and campag hubs are very similar. It's just that the axle nuts seem to be only protruding past the cassette by 1 or 2mm and so the cassette is very close to the frame once tightened up. OLD doesn't really matter I don't think since once the skewer is on, they're pulled in or pushed apart to the correct width anyway Shirley
PhilDAS
Scilly.Suffolk
Are the screws projecting past the inner face of the hanger? If so, putting a washer under the hanger screw heads would probably solve that part of the problem.