You are reading a single comment by @eraser215 and its replies.
Click here to read the full conversation.
-
The bracket connecting the front fender to the fork crown is too short. I can't file the hole big enough so that the fender sits low enough to not foul the wire between the v-brake arms (Tektro 926AL Mini-V)
I've got this issue on my pomp, and I've not got off my arse to solve it. I need to fabricate some kind of metal extension, which might involve some filing out, and brazing on of an extension piece.
fizzy.bleach
@eraser215
Hi all,
Anybody fitted SKS fenders on a Pompino v4? I have bought some Longboards for mine, but have the following concerns:
The hole in the seat-stay bridge faces down, making it extremely difficult to screw the metal bracket that clips onto the fender into the bridge.
The bracket connecting the front fender to the fork crown is too short. I can't file the hole big enough so that the fender sits low enough to not foul the wire between the v-brake arms (Tektro 926AL Mini-V)
Anybody had to deal with this before? Any bright ideas? I can take some photos if my words aren't clear!
Thanks in advance :)