You are reading a single comment by @Tijmen and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Tijmen
So I'm trying to install my old cranks on the orlowski just to have a little go. However when I put the crankset onto the frame/Bb, I start tightening and before it even gets overly tight the crank is too close to the frame (where they meet) and it doesn't spin. Just to clarify, the crank arms aren't hitting anything, it just doesn't spin correctly if I tighten the drive side crank properly. The other side appears to be fine. I've taken the cranks off and the bb seems to be ok
HELP PLEASE