You are reading a single comment by @edscoble and its replies.
Click here to read the full conversation.
-
You need this;
TBH it's easier to get this and run an 8 speed system, cheaper in the long run than a 10 speed system (and last longer).
edscoble-
What's the cheapest way to build a decent 1x8 setup? Can I use wheels with a 10-speed freehub?
@mdcc_tester :)
-
Ok, so I bought the hangar - but the 10 spd cassette jams against the hangar's bolt - assume that's what you were getting at when you told me to run it as an 8 speed? i.e. an 8 speed has enough clearance for that bolt?
So to add complication - the wheel has a campag freehub. I've never done it, but there's no issues swopping a shimano freehub in there, is there?
Tijmen
bashthebox
Got an old steel frame I wanted to build as a 1x10... but getting it out last night it would appear it's not got a deraillieur hangar. Not sure if it's been knocked off or what - there's a cable lug on the chainstay which suggests it ought to have had a hangar at some point.
What are my options? Can I get something welded on?