Any question answered...

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

Murphy's_Law in reply to @gbj_tester

Thanks. looking at the technical drawings from shimano I thought as much.
A bodge would be to file some mms off the axle tube and plug it with some other brands 20mm to 9mm converters.
But I'd probably die riding it.

•

gbj_tester in reply to @Murphy's_Law

To do it properly, you'd have to dismantle the bearing units and turn 5mm off each in a lathe. Plus a bit to clear the dropouts, since the fat stub probably wouldn't fit a QR fork. Far more trouble than it's worth.

•

Murphy's_Law in reply to @gbj_tester

Mhhm, no lathe, no tool for the bearing units...
XT it is.

About

Avatar for gbj_tester @gbj_tester started