Current Projects chat and miscellany

I'll sell you Campag Low flange pista and NOS Omega Vs: 32h...

1 or 2 bolt?

What seatpost?

Tried assembly paste?

So I just acquired this, my size (54). Currently transferred my old 6600 groupset onto it with ksyriums while I think about groupset and wheels to put onto it. Any ideas? Not sure I'm entirely convinced by SRAM, but it is a cannondale after all...on the shortlist as well are 6800, 9000, and Chorus. Wheels will likely be handbuilt soul kozak/sl23 climbing flavor.

Single bolt, and it's a genesis saddle I think, can't remember exactly, sporty looking one with CR-MO written on the rails

Not just for carbon.

Take everything out, clean it out, and install again.

Check for crack and the like.

Sounds like the clamp bolt or the wedge that it screws into could be threaded, which would explain why it's working itself loose. I would check both of those, and if that is the case you can buy a replacement bolt/wedge pretty cheap from bike shops as it's a common replacement part.

Let's talk over PM.

Thanks I'll do that tonight! Never actually cleaned it so it could be a good shout.

@tommmmmmm Cheers, I'll have a look at cleaning it and see if it clamps down properly then If it doesn't I'll give that a shot

If anyone has a silver or black (but not grey) 1" quill / 26.0 version to swap with me, then I have what you're looking for.
Or at least I will when it arrives - I only bought it the other day.

do you happen to still have the quill bit?! (if you ever had it in the first place)

Due Pina...



and a Lowpro

just upped my bag game on the Condor

liking the look

^ That looks the part..

Meanwhile currently parked in the garage opposite the Condor..

Just upped my winter game. 95% finished, reflective vinyl on forks/frame/stays/rear fender to come. Oh and that brake is just for show at the moment, need a caliper with more drop.

1 Attachment

You're gonna be so dry.

Genuinely can't wait for it to rain on Wednesday to test it all out! P-Clips worked a treat dude, and 10/10 for the adjustability of the PDW fenders.

I've a bullhorn , prety sure it's 25.4. Tried to fit into ahead 25.4 stem. Tighted the bolts. Was loose. Tighted the bolts. Was loose. Tighted the bolts. Was loose. Overtorqued the bolt. Bolt brakes.
Shit. Those bolts are nice.

1 Attachment

How did you remove the snapped bolt!? I suppose it broke outside the insertion... Lucky!

If you buy a workshop swipe bag from SJS cycles, you'll have some of these screws in it generally.

Clerkenwell Screws will have some too, if you're in London.

New build for the gt

ಠ_ಠ

madness