Power Meters / Powermeters (SRM, Powertap, Quarq, Ergomo, Vector, Stages, power2max, P2M, 4iii, InPower, Cinch)

You are reading a single comment by @amey and its replies. Click here to read the full conversation.

•

joel_austen in reply to @amey

Amey:
That locknut is supposed to be 40-50nm. You wont get near that holding it in your hand using an adjustable spanner. You need to put the rotor tool in a vice and turn the crank itself.

•

amey in reply to @joel_austen

I actually did this today .. i.e. the method you said wouldn't work, with loctite .. if it survives the ride tomorrow (and possibly the week ahead) I'll try and get hold of a vice .. the nut that holds it together is mere 2 or 3mm, can it even take 50nm without stripping/breaking?

•

Brommers in reply to @amey

In my experience, yes. Quite easily.

About

Avatar for amey @amey started