Nitromors hints and tips

^ thanks Indra, good tip

And you can decaffeinate your coffee if you have any left.

^ I need all the caffeine I can get at my age (:

Go get it dipped in a chemical tank. Comes out perfectly clean. I mean absolutely squeaky clean. And only costs a few quid, not much more than a can of Nitromorse and a few brushes... I use a company called SPC in Slough

Go get it dipped in a chemical tank. Comes out perfectly clean. I mean absolutely squeaky clean. And only costs a few quid, not much more than a can of Nitromorse and a few brushes... I use a company called SPC in Slough

This.
I used Mr. Picketts in Chichester. £15

I found the old active ingredient it's called dichloromethane and is available on eBay
http://www.ebay.co.uk/itm/Methylene-Chloride-Dichloromethane-DCM-General-Use-5-litres-/140865860561?pt=UK_BOI_Medical_Lab_Equipment_Lab_Supplies_ET&hash=item20cc4273d1http://rover.ebay.com/roverimp/1/710-53481-19255-0/1?ff3=2&pub=5574889051&toolid=10001&campid=5336525415&item=140865860561&mpt=3418852
It is also available in smaller amounts.

Reading that Nitromors isn't what it used to be, I took a punt on this paintstripper from an automotive supplies outfit, if for no other reason than it's much cheaper than Nitromors.

Just picked it up from the PO and am chuffed to see that it contains Dichloromethane, so should be the business.

Assuming it stays dry tomorrow, I'll get to work on my Olagnero and report back.

thread dredge.

Don't bother with this crap anymore, nitromors doesn't do anyhting to a decent powdercoat, i'm told it's because of new regulations and such leading to a change of recipe.

Read just a little up the thread.

So will this stuff be useless on Hammerite? About to try to strip my frame with it, is it a none starter? And if not, where do I find a local chemical tank?

Gurning outside a club at 6am.

Repped, despite the utterly useless comment

'Yiu must spread around some rep before yadadadadada'