Hammering is (probably) due to air trapped in the system somewhere, at a highpoint in the pipework. Find the highest point and drill a hole in it to let the air out- then see if the hammering noise stops.
Hammering is (probably) due to air trapped in the system somewhere, at a highpoint in the pipework.
Find the highest point and drill a hole in it to let the air out- then see if the hammering noise stops.
Don't do this.
@sacredhart started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Don't do this.