-
-
-
-
Looking for steel bike that is around 50-54cm in size, would like it to be lugged. Going to refurbish it so paint chipping or condition doesn't matter too much. Would like it to have 27.2 seatpost fitting, thread or threadless 1 inch fork, 120mm rear spacing and not too much rust :) If you have one please post a photo on this thread. Based in London. Thanks
-
-
Cervelo P3 Fork. Made by 3T. White from 2010 model. 43mm rake, 160mm of steerer. Steerer tube insert included. 1-1/8" steerer for 700c wheel. Has been used so has a number of cosmetic marks (notable ones are on dropouts and below brake hole). A seriously aero fork for a smaller sized frame. My 23mm tyre fits but I'm not too sure about a 25mm.Looking for £80 + £5 posted.
Thanks -
-
-
-
-
-
Dura Ace 7410 headset with NJS crown race (27mm instead of the usual 26.4) If you can find a 26.4 crown race then it will fit those forks as well. Included in the sale is M:part threaded to threadless adapter so you can use this on both type, also starnut. It has been fitted and used for up to 30 miles, selling because I changed fork to a 26.4. Will include either 1 inch or 1 1/8 inch carbon spacer depending on the buyer.
£70 + 3 posted3T ARX Team Stealth 6 degree 100mm stem with gold Ti bolt and original Ti bolt. Used but in really nice condition. I got a 3T ltd stem from a friend so this has no use for me.
£45 + 3 posted
-
-
-
-
I have a Gan Well road bike framest that I would like to sell. It also includes : Dura Ace 7410 Headset (fit NJS fork), Dura Ace 7900 Front Mech, Shimano downtube cable stop, Thomson Stem adapter (1 inch to 1/8) and handlebar adapter (26mm to oversize). I have a Columbus Minimal 1 inch carbon fork if you wish to include in the sale. There are few minor scratches on the top tube but these are only visible if you look close up. I have wrapped the frame with Heli tape so every where else is clean. I also had a incident where I used carbon quick release and the rear wheel rubbed the chain stays and the paint has come off.
Looking for £550 - located in London.
-
I have a Planet x nanolight 40cm carbon handlebar for sale.
Weighs 184g
There are mark from the stem and aero bar on the gloss finish. I also ripped out the cable guide underneath because I didn't want to re cable everytime I changed bar. Yours for 40 pounds delivered. Posted on Bikeradar but can't take it down. Will tell admin if it sells -
-
-
-
Looking for either 120 or 135mm stem.
Would like it to be in ood condition.
Thanks