Search results for:

1. Mavic MA 40, 36H Clincher Rim on Shimano 105 front hub, 700c, spins smoothly, Specialised all condition tyre, QR skewer and lever. Anodising not fully worn off braking surfaces- £25

2. Mismatched pair of mountain bike wheels. Mavic 719 32H rims, front pretty concave, rear new on Deore hubs, front silver with silver spokes, rear black with black spokes, QR skewers and levers, 135OLD, 8 speed, Nimbus tyres - Freecycle

3. Vuelta 36H road, clincher rims, slightly concave, on campag style/copy hubs, threaded rear 126OLD, spin freely but rear sounds gritty, 14-34 freewheel, Shimano QR skewer and lever for rear only, Continental Ultra tyres - no inner tubes - Freecycle

4. Similar but mismatched Weinmann 36H road, clincher rims (front slightly wider than rear) with very little wear, on Maillard hubs, QR skewers and levers, threaded rear 126OLD, a bit crunchy, Hutchinson tyres – no inner tubes – Freecycle

Collection Herne Hill

Possibly not all forum material, but we don’t use these bikes and we’d like to see them go to homes where they will be ridden:-

1. Koga Miyata Fullpro - £450
frame from 1984 bought off the forum https://www.lfgss.com/conversations/162421/#comment12576402.

Painted a slightly sparkly brownish grey by Mario Vaz, built up and then stored for a decade. I wouldn’t fit bullhorns if I were doing it now.

ST 60cm TT 57cm
Several storage marks.
Dura Ace 7400 series:
Front and Rear Mechs;
6 speed downtube shifters and gear cables;
Cranks with 52T and 42T chain rings;
Bottom Bracket;
Hubs – with rear having 13–23 6 speed UG cassette
Mavic 190FB Rims
Veloflex Pave tyres 700 x 22
Stronglight a9 headset
7cm Quill Stem
Fluted 26.8mm seatpost
San Marco Regal Saddle in Rhino Black Suede with copper rivets
42cm Bullhorns with Blackwell TT levers
Kyokuto top run pedals now fitted
Decals included (purchased but not applied).

Koga Pictures https://drive.google.com/drive/folders/1LG4fBJLRODBjf_6wR5OpqzdkUwxR-M46?usp=sharing

2. Alan Competition - £250
mid seventies lugged aluminium frame built up for Mrs Stanmawr as single speed but not actually ridden
ST 50cm TT 50cm
Frame has the odd scuff but no cracks or signs of deterioration
36 cm Bars
Scruffy-ish Campag Super record headset
5cm Nitto technomic Quill stem
Tektro Levers
Dura Ace 7400 double pivot brakes (thread on one of the adjusters has gone).
Holdsworth (Planet X) single speed cranks with 44T 1/8th chain wheel
Wheels are Mavic Open Pro built to large flange track hubs, Rear is flipflop with 18T freewheel and fixed sprocket and has been spaced out to 126 OLD. Rear rim is quite worn front less so.
Gatorskins
Richey type seatpost
Charge Spoon Saddle
Cartridge BB
Shimano Road Pedals

Alan Pictures https://drive.google.com/drive/folders/1_jXcWce6oxU_q0-bNkKLcCOgcH9yjG-x?usp=sharing

3. Gazelle Champion Mondial - £350
AB 531c (Frame no 3312802 from 1987 I think)
ST 63cm TT 57cm - ridden by 6’2”ish me.
Tired Original Paintwork, touched up in places. No dents or rust.
Cold set to 130 OLD (from 126) for 10 speed conversion
Built up 5 or 6 years ago with new or nearly new looking parts and used for the occasional Saturday ride.
Shimano 105 10 Speed STIs, Front and rear mechs
Shimano 600 Tricolor Cranks (Double 52T and 42T, 170mm Arms), Single pivot brakes and Hubs
Mavic MA40 Rims with little wear
Gatorskins
Richey style seatpost
Charge Spoon Saddle
Nitto technomic stem 5.0cm
Stronglight a9 headset
Anatomic Bars 44cm – serviceable but imperfectly applied bar tape
Basic Shimano cartridge BB
Raceblades
Shimano 105 Road Pedals
Shimano Tiagra 12 – 30 cassette

Gazelle Pictures https://drive.google.com/drive/folders/1PgzL4qBSp6u1cAXfycd-RbbYPnsrOXDI?usp=drive_link

4. Specialized Tricross Singlespeed - £150
winter commute
ST 47cm TT 51cm
Good cosmetically - ridden by Mrs Stanmawr who is 5’2”
Specialized 36 cm bars
Original Specialized headset, cranks (172.5mm Arms) and bottom bracket
5cm Generic Stem
41T 1/8 Chainring
Shimano V brakes with Tektro levers
Generic front wheel – Large flange track hub 19mm hybrid rim - somewhat worn
Interchangeable Rear wheels:

1. Generic as per front - flip flop with 16T freewheel – rim somewhat worn (not fitted and tyreless)
   
2. Sturmey archer 2 speed kick back hub 22T Sprocket – pretty much new
   Continental Sport Contact 700x35c tyres - almost unused
   Richey type seatpost
   Charge Spoon Saddle
   Shimano road pedals
   Mudguards
   Pannier worn, slimline rear rack is included as I can’t undo one of the bolts – top right braze on revolves.
   
   

Tricross Pictures https://drive.google.com/drive/folders/1wV_WDckLmUBj34CFn_urXvaZUlgTKRX1?usp=sharing

Bikes are in Herne Hill for viewing / collection

OK, I'll have to let you know tomorrow how much the postage will cost.

I don't know if there is any appetite for these things on here but:-

1. Shimano pd m540 used - £7.50 - Gone
   
2. Shimano pd m540 used - £7.50 - Gone
   
3. Shimano pd m540 fitted but not ridden - £10 - Gone
   
4. Shimano pd a520 used -£5 - Gone
   
5. Shimano pd m420 used - £5
   
6. Shimano pd m415 used - £5
   
7. Shimano pd m415 used -£5
   
8. Shimano pd m540 used right side only - free
   
9. Cleats - used - free
   
10. Cleats - very used - free
    J. Cleats - new - £2.50 - Gone
    Q. Cleats - new - £2.50 - Gone
    
    

Hopefully priced ok but willing to be told otherwise.

Collection from Herne Hill much preferred but will post at cost tba.

Sent you a PM.

My wife would like this. PM on the way.

My late 80s / early 90s Super Galaxy was JIS - (originally fitted with a Hatta Swan headset) but I got it milled down to ISO by Brixton Cycles. Cost me £16 but then I wanted to use a particular headset with a rubber seal to the crown race.

They are the Allen bolt type.

Yes, 62cm or 24.5"

Falcon era (1991-ish) Holdsworth Corsair road Frame and Forks (wheels for photo only)

531 butted tubes - not sure about forks and stays

Seat Tube 62cm centre to top
Top Tube 57cm centre to centre
Rear dropouts are short horizontal and spaced at 130mm

Paintwork is tired but servicable - the usual scrapes and chips - the transfers are a little dog eared. It is however free from rust, straight and without dings.

Comes with SR Laprade fluted seat post (moving freely), a newish UN54 BB and the original headset which works but maybe has slight brinelling.

£80 collected from Herne Hill, London SE24 --- Now Sold

I have the rear hub if you want to take a look. Looks good but slight pitting to one of the races.

I'd like these please.

Dibs please:

Shimano 600 calipers BR6400, excellent condition with original pads. £30 Price drop £26 Price drop £24

Pm on way.

My wife, would very much like a classic, light weight steel framed road bike.

She rides a 50cm square Dave Yates that I built as a single speed, in comparison to which her Specialized Dolce feels a bit lifeless.

So, if anyone is willing to part with a small bike or frame of a similar size and light weight steel tubing, please get in touch.

It was the washer that sits below the locking that nut I was after.

I managed to find one in light alloy at the Herne Hill jumble on Sunday. So thanks but sorted as far as I am concerned.

Still for sale.

Bought new in 2009. Aluminium. Original spec other than calipers replaced with Campag Veloce.

Set up in photo for my wife who is 5" 2".

Largely in excellent condition. One or two very minor blemishes to paintwork. The rear rim has taken some punishment from pot holes - works fine but you might want to replace in time.

£150. View in / Collection from Herne Hill (I don't want to post it). Now Sold

I'd be interested in one race and one cone for a Nuovo Tipo rear or failing that, a replacement 36 hole low flange Nuovo Tipo rear with good bearings (sans skewer).

Bought this headset NOS and have had it in a box for years, but now I want to use it I find that there is no key washer. Can anyone help?

24 1/2" (531ST butted throughout) touring frame from 1980s.

Seat tube 62cm c-t 60.5cm c-c
Top Tube 58.5cm c-c
126 OLD rear spacing
Capag 1010 dropouts

Straight with all threads good but cosmetically challenged with some surface rust. Has mudguard eyelets and brase-ons for a rear rack, one bottle cage and a pip to locate band on down tube levers.

Made for 27" wheels but 700c work fine as in pictures (wheels not included).

Comes with SR Laprade fluted seat post (27.0 I think and moving freely), bottle cage, Wienman centre-pulls which will do 27" or 700c, a Tange Allez headset which is good except for a rusted lock nut and a freecycle stem/bars/lever combo.

Gives a very comfortable ride. Was bicycle of the year in 1983. I believe it is the same frame as a Holdsworth Mistral so can be refinished as either. I recently had one painted by Mario Vaz and for an extra £20 could have had canti bosses added.

Looking for £70 collected from Herne Hill - Sold Now

Dibs the mudguards please.

I have two Claud Bulter Dalesman 531 ST F+Fs made by Holdsworthy in the first half of the 80s. Unfortunately whilst I can ride them, neither fit perfectly.

So..... if anyone has a cb dalesman of a similar age, 23 1/2 inches seat tube centre to top, that is too big or too small, I have a 22 1/2 or a 24 1/2 to offer in exchange.

**Now Sorted Thanks**

Dibs 33 (Sram 7 speed cassette) please.

Or something similar in 170mm. It strikes me that a stronglight 99 lh crank would look pretty much the same.

104 looks like this:

I'd like the Deore Mechs please.