Search results for:

PM sent!

I found these to be fairly decent if you get stuck - https://www.bricklanebikes.co.uk/blb-gravel-wheelset-29er

Otherwise I do have some Stans arch rims laced to White industries 6 bolt hubs, currently running 142x12 and 15mm but can get adapters.

Would be looking for £200 for the wheelset without adapters

Ah sorry, the exotics I have are around 180cm steerer

How long do you need the steerer to be?

I have an 18inch cindercone which is mostly there, I can sell it for £100 as it is or £200-£250 as a whole serviced, working bike

I have a bit of interest in the whole bike at the moment but will let you know if that changes! @Josh too

Last chance before it goes on eBay!

I would be very interested in this if Turkish doesnt want it!

Hey - what size are you after?

I am slowly breaking down my workshop and the bigger tools are going first!

This truing stand has been my home mechanics truing stand and not used very much. I do not have a base for it, it was bolted down to a wood table top before.

Its a £300 piece of kit from park tool ready to be put to use elsewhere!

accepts wheels up to 29" with or without tire
Calipers accept rim widths up to 4"
Accepts hub widths up to 175mm

I can post however costs may be between £15-£25 because its quite a weighty tool!

Well congrats to the OP - you now have an overpriced bike thread

I have a pair of ITM forks in the garage, been a while since I have had a look at them however steerer is definitely long enough if you're not already sorted!

Still looking, please!

Price drop to £700

I actually have someone interested in just the shifters so £40 + postage if needed for the mechs sound fair?

Giant wheels have sold

PM sent!

No sorry, I am moving my lights etc over onto another bike!

Writing this makes me sad.

I searched forever to find this bike, bought off of ebay as a singlespeed flat bar for £750 2 years ago and now I am selling it because I am finally admitting that I should have waited and bought a 21inch frame.
The frame is custom butted steel and has got removable sliding dropouts and the frame does split on the drive side to allow a belt drive. Standard 135mm dropouts on the rear and the fork is a carbon exotic fork (not the original).

I have made the bike my own adding in SRAM rival 1x11 hydro levers with Hope RX4 brake calipers in silver. Salsa woodchipper handlebars for some super flare, not too traffic friendly but they just suited my needs.
Rear mech is Apex and its running a Hope 38T single chainring with FSA chain guard which will cover up to a 42T chainring. Cranks are XT with deore hollowtech BB in good condition.
Chain is less than 500 miles old and this is the 3rd chain on the 11-42T XT cassette.
Custom built Hope pro 3 XC hubs laced to Mavic 821 rims - these rims are really nice and light with the added bonus of not having to remove the tyre if a spoke ever broke.
Tyres are TUBELESS Schwalbe Marathon Almotions in good condition, never had a puncture with them, although I topped up the sealant on the front tyre and put it on backwards.... because who tops up their sealant before bed....

The disc rotors are silly, definitely uneccesary huge rotors however these came with the bike and if it aint broke, dont fix it... However the rotors and pads do need replacing and I will do that before the bike goes anywhere, will be fitting 180mm rotors front and rear with new pads too.

The saddle is Fizik Tempo Argo R3 Les Classiques Saddle, a special edition saddle to match a special bike.
The frame does have some chips and marks to the paintwork, no dents or evidence of major abuse but the paint is as you would expect for a bike that has been used every day for the last 10 years.

I can offer postage, I would just rather not if I can avoid it. The bike is in SE3 for anybody who would like to come and see it.

Asking price is £750 - NOW £700

Mini gear set available again!

Moving house soon so its time to get rid of my spares little by little.

Giant PA2 Wheels have been in storage for a while, both thru axle with 6 bolt disc fittings. Bearings feel smooth and wheel run true.
The tyres on them are no good however the wheels are tubeless ready. Will run an 11 speed cassette on them too.

SOLDI am looking for £70 collected from SE3 or can post for £15 in the UK

Secondly I have an Ultegra/dura ace 10x3 gear set, both shifters are working and includes an ultegra triple front mech and Dura ace 7803 long cage rear mech. All working, have tried to clean everything up.
Looking for £70 plus £7.50 if posted within the UK - not looking to split this.

Writing this makes me sad.

I searched forever to find this bike, bought off of ebay as a singlespeed flat bar for £750 2 years ago and now I am selling it because I am finally admitting that I should have waited and bought a 21inch frame.

The frame is custom butted steel and has got removable sliding dropouts and the frame does split on the drive side to allow a belt drive. Standard 135mm dropouts on the rear and the fork is a carbon exotic fork (not the original).

I have made the bike my own adding in SRAM rival 1x11 hydro levers with Hope RX4 brake calipers in silver. Salsa woodchipper handlebars for some super flare, not too traffic friendly but they just suited my needs.

Rear mech is Apex and its running a Hope 38T single chainring with FSA chain guard which will cover up to a 42T chainring. Cranks are XT with deore hollowtech BB in good condition.

Chain is less than 500 miles old and this is the 3rd chain on the 11-42T XT cassette.

Custom built Hope pro 3 XC hubs laced to Mavic 821 rims - these rims are really nice and light with the added bonus of not having to remove the tyre if a spoke ever broke.

Tyres are TUBELESS Schwalbe Marathon Almotions in good condition, never had a puncture with them, although I topped up the sealant on the front tyre and put it on backwards.... because who tops up their sealant before bed....

The disc rotors are silly, definitely uneccesary huge rotors however these came with the bike and if it aint broke, dont fix it... However the rotors and pads do need replacing and I will do that before the bike goes anywhere, will be fitting 180mm rotors front and rear with new pads too.

The saddle is Fizik Tempo Argo R3 Les Classiques Saddle, a special edition saddle to match a special bike.

The frame does have some chips and marks to the paintwork, no dents or evidence of major abuse but the paint is as you would expect for a bike that has been used every day for the last 10 years.

I can offer postage, I would just rather not if I can avoid it. The bike is in SE3 for anybody who would like to come and see it.

Asking price is £750

Hey there!

I think this is a disc hub. If you remove the rubber on the end there it should reveal your centrelock disc fitting.

Non disc hubs look quite different like the image below, notice how the hub body doesnt have the dips before the flanges.

Also if Spaniel doesnt want it, I would be interested!

Hi all,

I am looking for a disc compatible hub geared wheel or just hub alone. I am building a bike for a friend and the hub will be used on a 20" rim.

32H or 36H considered, black or silver, Sturmey/Shimano preferred. As its disc I am not sure it matters but OLD needs to be 135mm.

If you are offering a whole wheel please note that I only need the hub, so I am not looking for a pair and not looking to pay for a nice rimmed hub gear wheel.

Thanks in advance

I have a 56cm allez with Sora which I am willing to part ways with for £300 its the 2017 model, black with red fork.

Let me know if you're interested!