Search results for:

144

what's the bcd on the cranks please?

Price Drop - Frameset £300 - final drop before Ebay

Wheelset added to original post - £180

**Frameset + BB + Headset + Seatpost now £320

Cranks now being sold without chainring for £65**

interested in quill stem,is 26mm the diameter ; external ;of the vertical part,just need to measure on my old bike

no 26mm is the clamp size for the bars - it is 1inch (the vertical part)

I understand that without verification of the frambuilder/pinarello pantographs its fair to doubt its authenticity, however, as mentioned in OP, it was imported by a company which confirms that it has only ever imported Pinas. Anyway if nobody is interested at this price i may drop the price at some point, or put it up on ebay. thanks for all the feedback people. Regarding size, the seatube is about 54.5cm and the top is 54 - i think the '55' stamping must be referring to something else
cheers, G

photos with 700cc wheels with 20mm tyres, theres another 5mm left in the rear dropouts

nitto risers SOLD

If I tell you its a DeLorean is it a DeLorean? If I tell you it goes back to the future at 88mph does that mean it does time travel?
lol

It does look like a decent frame but I think optimistic pricing since there is no guarantee that it is a Pinarello and we dont know what quality tubing it is. Have you tried to find out grade of tubing? do you know the weight of the frame and forks?
Sure, no i havent, i'll weigh it now

Is there a serial number?
it has a '55' on the bottom bracket shell and trackends, thats all

Not a Pinarello - no pantographing of any kind to suggest such. Suggest you change thread title.

Well ive been told its a pinarello, i wondered whether it is a specific/custom model for export as the detailing on the frame is consistent with some other Pinarellos ive seen...

Dibs headset on the outside chance you feel like a split

id rather not split, but if i do i'll let you know

looks quite a bit bigger than 55?

maybe beacuse of the geo? The seattube is maybe 54.5cm c-t-c at most, but basically 54 square

I'll upload a photo with wheels to show geometry tomorrow
G

Hi all,

Sold Pinarello track frameset

The decals and paintjob are from a small Somerset cycling club 'Camelot VC', i got in touch with them and the rider whose frame it was said that it was imported for her from Italy by Phil Griffiths. So i got in touch with his company http://www.yellow-limited.com/ who said that it must be a Pinarello as they were the only frames they imported. I dont know what tubeset the frame is made from but i would guess it was some sort of Columbus as its pretty light. Its got Campagnolo dropouts front and rear, fastback seatstays, bottom bracket cutouts and heartshaped lug cutouts.
Drilled for front brake.

No dents or dings, the paintwork has a few chips and scratches, the chrome on the forks is flaking slightly near the crown.

Seat tube c-t-c: 54cm
Top tube c-t-c: 54cm
Rear spacing 120
front spacing 100

Sold frameset, Suntour headset, Campagnolo Record BB (109mm) and unmarked seatpost 27.2mm

**Sold SR Royal Track Crankset 165mm with 49t chainring **
In good condition, a few little scratches, would benefit from a thorough clean.

**£10 Cinelli 68-40 Tour 26.4mm clamp **
Apparently quite rare but they are in quite bad nick, scratched heavily around clamp area http://velobase.com/ViewComponent.aspx?ID=8df40ca2-9d33-4028-8417-cd471a7b8fa9&Enum=112

** SOLD**
the grips have two little rips

£20 140mm Cinelli Milano quill stem 26mm clamp
good condition, 1 or 2 little scratches, stem bolt has a bit of rust on the top, none on stem though
this stem in 14cm http://www.pelotonstore.com/szilvi06.10/cinelligi-1371648439-22081.jpg (not my photo, i wasnt able to focus on the logo on mine with my rubbish camera)

**Wheelset £155 - Front - Campagnolo Lambda Strada 28h clincher and unmarked front low flange hub

                               Rear - Wolber TX Profil 28h clincher and low flange Campag Record Pista hub
                               20mm Wolber Tyres & 15t Sprocket**

Sorry for the bad photos, i'll try and borrow a better camera and upload some more. And if the prices are way out let me know and i'll amend them. Collection in Brixton, or will post at a cost
Cheers, George

who can help?
italian

i've been trying to identify my frameset with very similar details, ive been tld its a pinarello... hope that helps

http://s1285.photobucket.com/user/georgemeadows1/library/

what length are the cranks?

http://www.lfgss.com/thread108885.html

Can do the arms for £100 or the arms and cranks for £120

good price but im looking for the 165mm pair, thanks though

Looking for a pair of Sugino 75 165 mm cranks, black preferred but will take silver too, anyone got some they wanna sell?

Hey everyone - im after a Gangsta track in large (50cm). Am ideally looking for something quite beaten up and with the V1 forks, but im not picky...

alternatively if someones got a GT pulse in 56 they wanna part with?

thanks

i'm also looking for a GT pulse frameset in 56 - anyone got one theyre looking to sell?
cheers

lovely frame, dyou have a picture of it with wheels on?

Hi,
does anyone know which framebuilder may have built this f + f?
the only framenumber i can find on it is '55' on the bottombracket shell and on the dropouts. its got heartshaped lug cutouts and has decals from what i assume was the club it was ridden/built for 'Camelot'. Any help much appreciated, cheers