-
Not 54cm square but 54 equivalent.
Very nice hand made Danish Principia rcs - s6 frame, made from aluminium 7020 tubing with full carbon forks. 2003/4 vintage and was pretty high end back in its day. Weight for the bare frame is just under 1.5kg. Compact geometry and the actual sizes are TT 54cm c-c, ST 46cm c-c. I am 5'8" and was riding it with a 90mm stem. Takes 31.4seatpost and english thread bottom bracket. Condition is very tidy for year, a few very small marks. Unfortunately has a small shallow dent in the top tube, pictured as best I could. Was there when I got it and doesn't affect the ride in any way. Covered it with a sticker and forgot about it.
Comes with full carbon forks which have about 20mm of steerer left after stem fitted. Headset bearings are a bit notchy but not noticeable when on the move. Steerer bung fitted, spacers and top cap included. Also has downtube cable adjusters, seat clamp and seatpost shim to allow 27.2 posts to be fitted.
£115 posted, as I am in Birmingham.
-
Replied to both. Provisionally sold to Dick.
Thanks.
-
SOLD
Plenty of life left in these. One is more worn than the other (see pic) but no nasty cuts or anything. I'm in Birmingham so £24 posted.
-
105 FC5502/5505 hollowtech chainset for octalink bottom brackets. 170mm length. Light scratches and heelrub but overall decent condition. 53/42 chainrings, outer a bit worn but plenty of life left, inner looks virtually unused. Bolts included, £25 posted. Can include a decent dura ace 7700 italian thread bottom bracket for £10 extra.
Ultegra 6500 front mech. Clean condition and functions 100%. For double chainsets, braze on type but it comes with a shimano 34.9 clamp which is removable so doesn't have the curved washer. £15 posted. 6500 is a 9 speed group but the mech will obviously work with 8 and 10 speed too.
Ultegra 6500 9 speed cassette. 12-25t with lock ring. Unknown mileage, some of the coating worn off the teeth but the teeth profiles look ok. £12 posted or £9 if bought with any of the above.
-
Still available.
-
Thomson seatpost in virtually unmarked condition. Has been cut down and the straight section up to the clamp is 210mm, diameter is 30.9mm. Weight is 184g. I'm in Birmingham so £23.50 posted.
-
Now sold, thanks.
Titanium railed San Marco Regal saddle. Overall, good solid condition with no rips or tears. Some scuffs to rear corners and slight scuff / discolouration to nose. Would probably clean up well with the right leather cleaner. weight is 289g. I am in Birmingham so £25 posted.
-
Sorted now, thanks.
Bought a bike recently and the bottom bracket fitted is the wrong size so looking for a chorus or similar square taper, italian threaded one in 102mm width. Sealed type.
Could either buy or swap for chorus 111mm width or dura ace 7700 octalink 109mm, both italian threaded and in excellent condition.
-
Don't worry pal, this will sell quickly.
-
Love it. Want it. My size. Must resist...
-
To be fair, there are that many flakes on here that dib and then undib or just go quiet, which makes the sellers life more difficult. I'm sure the guy would have held it for you tomder if it wasn't for all the wasters above.
-
Based on evaluating the above data in a Columbo like manner...
Is this your bike thief? Doesn't look like your average toerag but morgasm might be able to confirm.
-
Stondon Park is the road for that postcode. Might jog some memories.
Also a Daniel Prendergast, a blacksmith on Deptford high street 2.7 miles from SE23.
-
The thing is from what I understand, morgasm may have only met the guy that once to hand over the bike. This cubism chap should then have sent it on as per the agreement but he has blatantly stolen it. It needs someone who knows or has dealt with cubism aka daniel prendergast to provide an address so the theft can be reported to the police / someone goes round and punches him in the throat.
-
its ok m8, i'd be pissed off too. The guy that went to view the frame is a prolific poster on here. Has he not come back to you with an address?
-
As said before, a guy off here went to view a frame he was selling so would have an address (maybe no longer current) but if you are too worried about sending a few pm's to people to try and get a bit of info, then you should probably forget all about it.
-
Yeah great looking bike and a good price. If it was a touch smaller I would be buying it.
-
ebay, really good piece of kit. Well made and you get 2 brackets so you can use the arm in a couple of places.
-
SOLD
Had this a while now and am unlikely to build it up, it's a Raleigh special products steel frame, non original alloy 650c forks fitted with a nice, fairly smooth campag headset. From the looks of the condition it's had very little if any use, maybe just built up. Paint is in lovely condition with only small storage type marks. Forks are pretty tidy too.
Frame has internal routing for the rear brake cable, takes a 27mm seatpost and british threaded bottom bracket. Non horizontal rear dropout so would need eno hub or possibly a half link chain to run it fixed.
I know sizing can be a bit hit & miss with these but actual measurements are tt 54cm c-c, st 51.5 c-c, 54 c-t, head tube is 83mm. It is a pretty light thing and weighs 2.36kg for frame, fork and headset. I would say it would suit a person 5'6" to 5'10". See the picture of it next to my concorde for reference. The concorde is 54tt, 53st and I am 5'8".
I am in Birmingham so would have to be posted and am looking for £125 delivered. Wheels are not included but I can include the front 650c mavic tubular for £40 extra.
No dibs, interest by pm please.
-
Looking through a few old posts it seems gaz1979 went to view a frame he was selling, so might be worth pm'ing him for address and either visit there or inform the police of the theft.
-
Threaded or ahead? What length of steerer required?
-
^ In all fairness he may have used a different username on here. LaurenceCardiff has gone quiet. Does that mean you have received a full refund or are just too polite to name the cunt?
LFGSS
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
SOLD
Very nice hand made Danish frame, made from aluminium 7020 tubing with full carbon forks. 2003/4 vintage and was pretty high end back in its day. Weight for the bare frame is just under 1.5kg. Compact geometry and the actual sizes are TT 54cm c-c, ST 46cm c-c. I am 5'8" and was riding it with a 90mm stem. Takes 31.4seatpost and english thread bottom bracket. Condition is very tidy for year, a few very small marks. Unfortunately has a small shallow dent in the top tube, pictured as best I could. Was there when I got it and doesn't affect the ride in any way. Covered it with a sticker and forgot about it.
Comes with full carbon forks which have about 20mm of steerer left after stem fitted. Headset bearings are a bit notchy but not noticeable when on the move. Steerer bung fitted, spacers and top cap included. Also has downtube cable adjusters, seat clamp and seatpost shim to allow 27.2 posts to be fitted.
£115 posted as i'm in Birmingham.