Search results for:

Prolite Padova rear disc wheel.
It currently has a Vittoria Evo CX 320tpi with kevlar (takes pressure up to 200psi).
I've only used it for track, but it can be used for road I am told, although I have never tried.
It had a small knock in the side from the turbo trainer and was repaired professionally by HQ Fibre Products for £78 + postage. You can see the patch on the side near the hub. I have raced on it numerous times since.
Otherwise it is absolutely fine. Some marks from the tape which I used to cover the valve hole.
Collect from near Gerrards Cross.
£180 ono
More pics to follow.

3 more pics

Selling my gorgeous Corima 4-spoke. It runs really smoothly and has a Vittoria Pista Evo CS glued on.
There is a little damage (see photos) which ought to be repaired. There is one main place on one spoke about an inch or two long and a little scuff near the rim. It was as a result of someone's front wheel nut scratching it during a race, but no crash. There had been a couple of previous minor scratches which HQ Fibre in Norfolk lacquered over, after which I raced on it for a couple of years.
It's a lovely wheel, but you will need to get this latest damaged fixed.
A few more photos to follow.
£125
Collect from near Gerrards Cross.

Collect from near Gerrards Cross.
Picture of wheel bag attached.

Selling my lovely ZIPP440 front track wheel with aero spokes.
It has a Royce hub and spins beautifully.
It has a Vittoria Pista Evo CS glued on, which has life left in it, but you should inspect the tub and the gluing carefully as I have not used it in a while. It comes with a valve-extender.
£150.
Add £5 if you would like a campag wheel bag too.
Thanks.

I was using it right up till I bought a Brompton.
The front wheel (by design) has a peculiar way of folding/unfolding. It's a little fiddly getting it back in place when you unfold it. Generally, it could do with a good service.

ok. waiting on Mat the Hat.

Sorry. Collect only.

Bought new and hasn't had much use.
I can't remember the make now.
Hopefully the pictures will show everything you need to know.

£20
Collect from central London - between Chancery Lane/Russell Square/Grays Inn Road area.
Could post - pm me if interested.

Thanks
Jobs.

It's a Sugino 75 chainring - 53T - 1/8 - 144 PCD - NJS
Photos attached. It has the remnants of a small sticker on it (which you can see from the photo), which I decided not to pull off, in case it was important to have it!
Good used condition. Some tarnishing. I hope the photos show you everything you need.

£39.
Collect from central London - Chancery Lane/Russell Square/Grays Inn Road area.
Could post - pm me if interested.

Thanks
Jobs.

It's a Sugino 75 chainring - 52T - 1/8" - 144 PCD - NJS
Photos attached.
It's in good condition. The 'Sugino 75' is very faint, but still there, just under where the previous owned had written '52' in permanent marker. I hope the photos show you everything you need.

£39.
Collect from central London - Chancery Lane/Russell Square/Grays Inn Road area - or near Gerrards Cross, South Bucks.
Could post - pm me if interested.

Thanks
Jobs.

A few more photos .....

I used this Mezzo 9 speed folding bike for about 3.5 years. It was second hand when I got it but in very good condition.
It's now 'well used' and needs a lot of tlc.
It's got Marathon Plus tyres on it, which have had very little use. I have half a mind to take them off to use on my Brompton, but happy to sell the bike with them on for now.
It comes with the original folding pedals - I have taken the pedals off (there in one of the photos). I mostly haven't used the pedals.
There are a couple of spare bits (see photos) - the silver coloured bit is worn out, but the black 'stem' is unused.
I don't claim that much of it is in great condition and you might want to buy it for the parts (eg tyres, pedals, seatpost, wheels, etc), as I know that Mezzo parts can be a bit tricky to come by.
I hope the photos are sufficient. I can only upload 5 photos here, so I'll either 'reply' to this post to add some more, or send me a PM and I can email you some more photos.
Collect from near Gerrards Cross (South Bucks). If you get the train from Marylebone to Gerrards Cross (20 to 30 mins) at a weekend, I could meet you at Gerrards Cross station to hand it over.

There is some damage to the saddle, towards the back on the right (just visible on one of the photos) where it has scuffed against a brick wall quite a few times - where I leaned it against after getting it out of the garage on numerous occasions.

£95 (no offers - given the value of the usable 'parts').

Thanks
Jobs

What more can I say?
It's a Sugino Zen chainring - 48T - 1/8" - 144 PCD - NJS.
Photos attached.
It's in very good condition. Hasn't had much use. There is slight staining from the oil from the chain, but that's all. I hope the photos show you everything you need.

£55.
Collect from central London - between Chancery Lane/Russell Square/Grays Inn Road area.
Could post - pm me if interested.

Thanks
Jobs.

I am looking for some drop handlebars to use with my old Look road bike, but which are not as flexible as the ones on there right now. Because it's about 15 years old, the diameter is only 1 inch.
Approx. 43/44cm centre to centre.
Used but in reasonable condition, please, but not damaged or crashed.
Thanks
Jobs.

I am looking to buy a folding bike for commuting. It needs to be in reasonable condition and have mudguards. Preferably 6+ gears and pannier rack. Ideally, to come with bags as well (ie for the rack and/or the handlebars/steerer.

Also, importantly, it needs to be suitable for someone 6ft2.

Oh, and it needs to be able to withstand some hard pedalling.

Max £100, unless you can persuade me otherwise. If the tyres are in poor condition, then my budget would be a bit less.

I don't want to spend too much until I'm sure I like the folding bike arrangement for commuting and the actual ride itself.

Thanks in advance.

Jobs.

...oops. I mean 'folding'! Stupid mobile keyboard...... :-(

Will Brompton Eazy wheels fit on other folding bikes so you can pull them along when folded?

I realise that it may depend on how the bike folds. In which case, are there any makes that fold in the right way?

Jobs

All sorted now. Thanks.

I need a long seatpost - 25mm or 26mm diameter. Can meet in central London or South Bucks.

Also looking for bar ends for a MTB.

Any offers?

Thanks

Do you have a photo?

Thanks Steve58.
However, I'm looking for something less than £10.

I'm looking for a 120mm or 125mm Quill Stem - 22.2mm diameter, clamp size 26mm

The one I have flexes too much!

Thanks

Jobs.

Is the quill stem still going?
If so, what diameter is the down tube?
What diameter bars will it hold?
What angle drop is it?
Thanks

I'm looking for some stiff 31.8mm track sprint bars which are less than 40cm centre to centre.

Thanks!

Here are some pics....

It's "NJS" for those interested!

The chainring hasn't had all that much use. The second photo looks like it has, but it's just where the sheen has come off with a little use.