Search results for:

i have a 1 piece crank in 165, if for a bmx, with the bb for bmx for about £15

i have some 165mm ta cyclo touriste's with shaved faces for about £24 - even have a 44 toothed ring - but they are old school,

-if you want new school cranks, then go have a look on groove racing they do fmf canks in 165 for 15 quid, note, you will have to use a 108mm bb

170 mm cranks with chain ring and campy bolts reduced
to 65 quid, mine have campy ring bolts and 2 chainrings, thouigh both have hooked toofs

super record low flange 36 hole hubs - a pair, the ones with the clips, scripty campagnolo and record underneath £65

without the clips, just a campy logo, low flange =pair front and rear low flange, english thread
£40 a pair

note these are not track hubs, -q/r and they dont have any skewers

-will trade a pair of hubs, for a pair of track spindles and nuts

ps

also have 165 ta's - 44 ring £30

170 suntour vx in gold £35

they are in fulham, I am not posting anything

3 in a diamond
-strada

come with ring 43 and campagnolo bolts

campagnolo 36 hole hubs £40 a pair
0774 858 2044

campag bottom bracket -english
108mm spindles
campy crank caps
ta crank caps
ti spindles 108mm
campy axle bolts
rear calipers 80's
track pedals, with the cages - 80's
1 inch round headset, alloy one - campag
track spindles and nuts

swaps for m9 front track spindles

also six front skewewr campy axles to trade

great
so i will see you at w.e.b. this thurday?

i have, but was merely slightly concerned of the lack of correct track nut, and was wondering if they were 3/8ths nuts or the correct m9 26tpi
or even m9 by 1
see, i am really only after a hub set that has complete campy nuts and spindles
-as I fear I have built some wheels already, wanting track spindles, and i shall sell on what will be purchased, with skerwer spindles, if you get me?

so no - i no want them
-unless they are cheap, plus they have no oil clips , so in all if they are not 36 hole neither they arn't not what I am after!

unless they are 36 hole and do have campy spindles, of which I then would have to purchase 4 track nuts at 40 quids, which I no wanting neither, plus locate the oil clips , of which would nigh on be an impossibility, having to buy another set of record hubs to this end.#

still if you want thirty quid for the hubs - if they are 36 hole, i will collect at west end beers - thurday

OR EVEN part ex a LATER MODEL pair of 36 hole small flangled hubs, with skewer spindle, the 90's ones with the pista sheild logo, all nicely polished and with EXTREMELY smooth doings

-thanks

please
odd
spares
etc

1inch headset

bottom bracket
crank caps
chain - hollow pin
rear caliper - not delta or skeleton -

all 80's stuff please

150 mm TA cyclo touriste cranks, they come on some tandems years ago - 155 160
20 inch 28 hole nisi tub rims they are more like 17ichers
1980's cook bros dog bones
bullseye hubs
hollow pin chain - nice
any old 80's early bmx stuff

http://www.bonthronebikes.co.uk/1011/91-414573

make no sense 30 odd quid ffs

E.A.I axle sets m9 - m10 26tpi60 bucks, 30 pounds, where from in the uk?

http://www.bikeplus.co.uk/cgi-bin/quikstore.pl?store=&search=yes&detahttp://www.bikeplus.co.uk/graphics/10mmgripfast.jpgil=yes&product=WHEELFIXED58&category=Wheels_Fixed&keywords=&hits_seen=&page=search.html&and=1&affiliate_id=

look like campy ones, plus they are £2 a pair instead of twenty
m9= m10, hopefully 26tpi

now to find a m9 26tpi front axle spindle

mavic 400? tub rims = pair
all 36 hole
all alloy, id say about 8 or ten rims
all different
-the dust-men won't take them
dunno sizes
i will post the lot to you
-let me get them all together?, take a pic
-wait till the weekend though as some rear ones have a funky free wheel, of which my mate has the remover for
then i will take one pic of what you will get
-fling them in a bin back, whizz tape around and post them to you
=tenner plus 5 quid post

oh plus
-i have a bag of new chain tugs, just the cheap sort, £5 a pair
-i have about 15 pairs

dixon hath snagged the cranks, and a set of hubs

rolf primo accel, now, these are the same price new as the 700's
anyway, they are 20 quid each
406/14, take a 406 by 28 tyre

will swap a pair of campag hubs for
campag or miche track spindles and nuts

ps
I want one of these 1 inch to complete my set!!

if anyone fancies a swapsies

ps note i have 6 or ten rims in the back of my car that i am going to fling

the ta cranks are cyclo touriste old school 1980?
the flutes have been ground off the front
and i robbed one bolt out of them
-hense cheap

yes in fulham
north end and lillie road junction
-ring 0774 858 2044, when there for further instruction
-noote I am in all day today wainting for a delivery

I have some freewheels
16 17 18
new and old school bmx levers
old school brake calipers, weinmann
new shimano tagra, whatever iyt is?

Will have a swapsies
need a front large flanged 36 hole campy hub, with the circular holes
i am in fulham

170mm campagnolo pista cranks, the fluted ones with the sheild, £40, you will need single ring chain ring bolts, plus i have 2 52 toothed chain rings

ULTIMATE TRACK CRANKS
125MM CRANK ARMS-ISIS, WITH 113MM/68 TITANIUM FSA CARTRIGE BOTTOM BRACKET, WITH A 25 TOOTHED TITANIUM PROFILE CAINRING
:? HA HA HA, Iam laughing, but I bought it:~
165 ta' lightened with 44 toothed ring £20
, see, some one though it'd be a good idea to lighten them by skimming them, still if your bag is function over form, they are cheap enough, and the tapers are all good and square, threads in pedal boss's a=ok
170MM SUNTOUR VX IN GOLD WITH 39 TOOTHED RING IN GOLD, OLD SCHOOL BMX £30
36 hole campagnolo hubs, like record 1982ish but with no clips, low flange, no skewers, fit anti theft skkewers and a english threaded freewheel-OR maybe a threaded fixed cog and lock ring from sjs cycle or condor? £35 a pair
w
mavic sew up rims a pair -old £5
some other rims £2 each, all 36 hole

406 by 14mm rolf primo accell front wheels 14 spokes, butted spokes =sealed bearing, shopper bike width hubs, take a 406 by28 s tyre
i havE 2 £20 each, -big up the shopper fixies!!!

brake levers straight, old school diacompe straight lever 1980 £5

real left hand lever in blue, nice £10

new bmx left hand tectro levers £5

113 titanium isis bottom bracket £39 =new

today I am mostly wanting campag track spindles and nuts, will swapsies

WANTED A 'TRIKE' ANYTHING THAT IS NICE, NEED NOT HAVE COMPONENTS, JUST FRAME FORKS -REAR AXLE/HUBS
IF YOU HAVE SOMETHING OLDER AND REAL NICE CALL 0774 858 2044
MUST BE FEATHERWEIGHT

I think i have fathomed it out,

campag front axles are m9 by 26tpi

cheap hollow 'rear' long track front spindle from the local bike shop at a quid each are
3/8 =9.5mm by 1inch=25.4mm
i need a longer axle at the front anyway

so to fit a longer axle to the front of a campagnolo axle, i just buy a 3/8ths by 25.4 tap set, and run it down the cones and lock nuts
fit in a rear 3/8ths by 1 inch rear hollow spindle, fit the tapped campagnolo cones and lock nuts,and fit the 50p a pair alloy nuts
total £3

on the rear, because i only require 116mm, simply remove the spacer, centralsie the axle, and run a m10 by 26tpi tap through the 50 pence alloy nuts

=sweet
total £4, not 59.99 bucks plus shipping

to fit campagnolo hubs
-you know like 50 pence each
rather than 18 pounds

ah, and self extracting crank bolts
-that aren't 25 pounds a pair