-
Bump and with a fiver knocked off the price of the crankset
-
Second dibs on the Cannondale mech hanger if the other poster has changed their mind
-
I've got some M505's that have done a good shift but still work perfectly. I'd be happy to sell them for very cheap to be honest given the wear on them.
-
I bought the wheel set from this forum several weeks ago, they have done 0 miles since purchase as I've discovered that they cannot be converted to quick release. All I did was mount some tubeless tyres on them (they mounted with only a track pump).
XDR freehub body and really not much wear on them, they come with the AFS lockrings. I paid £40 and would ideally like that back.
Also for sale a SRAM Rival 1 GXP crankset with an Absolute Black 46t oval chainring. Crankarms are 175mm in length.
As you can see the Crankset is well used but still absolutely fine but the chainring has barely been used. I could also provide a threaded GXP bottom bracket for free but to be honest the bearings are past their best. £45
Pick up only for the wheels, I could post the Crankset but would prioritise buyers who can pick up. Collection is from SE4
-
I've got a pair of R8000 shifters going spare, some scuffs but work absolutely fine. I'd rather sell as a pair to be honest.
-
And a spec, there's only so much you can tell from the photo!
-
Very cheap indeed. Thank god it's collection only in a location I can't really get to.
-
Did not know that there were two different types.
For what it's worth I did once run a SRAM Rival 1 medium cage rear mech with an 11-32 and it shifted fine.
-
A Force 1 rear mech can shift up to a 42t sprocket officially and a 46t sprocket unofficially so they do provide a lot of range.
If you don't mind some fairly large gaps between sprockets then that'd be the cheapest and easiest way of doing things. A longer chain would obviously be needed as well.
-
Several other teams were also using third party 11 speed cranks with power meters with 12 speed Dura Ace set ups with no issue. Due to Shimano not being able to make a reliable crank based power meter.
-
Mike Ashley must be clearing warehouse space for all that Wiggle/CRC stock he's just acquired
-
The front mechs I've got from Merlin never come with the support plates
-
Indeed. When it comes to some items such as bottom brackets Shimano can be quite overzealous when it comes to how much grease they apply at the factory.
I've often found Merlin also sell OEM parts which goes a long way to explaining why they're often good value.
-
Price drop to £425
Definitely pick up only I'm afraid.
There had been some interest from buyers who would require the frame to be posted. I'd forgotten how much faff it can be to post frames when you don't have the materials to hand and don't have too much spare time to get hold of them.
-
105 Crankset still available? Dibs if so
I'll send a PM as well -
I've got a Rotor BSA30 BB that's spare and barely been used.
-
FYI my Rasket has now been sold
-
It's very hard to find end caps for these OEM Formula hubs or other spare parts for that matter.
TBH they're made to be as cheap as possible which means that they're designed to be thrown away instead of repaired. Which we can all agree is a pretty terrible state of affairs.
-
It's still available. I did get a PM from another user about it yesterday morning but they haven't responded since, I'll send you a PM
-
I've got an FSA SLK light 170mm crankset with a 44t chainring. I also have a Rotor BSA30 bottom bracket to use with it.
-
PM sent
-
Less suspicious, just morally dubious about how a seller which appears to be a proper shop can think it can get away with asking so much for a frame that's clearly fucked:
-
Nice deal. You don't usually get the Chorus disc groupset for less than that, let alone the rest of the bike!
-
Dibs please, will send PM now
LFGSS
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Thought I'd finally post my CAAD 13 Disc. Have previously had a 12 which I loved.
It's bang on 7kg as pictured. I've had the frame since new and it's been built into so many different guises over the years.
Basically completed but would like to change brakes for Hope RX4's in the future, those speed release axles for some Robert Axle project ones and try a direct mount hanger.
Just changed the BB30 bearings for some NTN ones which are super smooth compared to the stock ones which I removed.
Many parts are from the forum including the stem, bars, cages and the waxed chain.
BTW I know the cables are a bit long! When I next have some time that's my next job...