Search results for:

Cassette will be cross compatible between Shimano and SRAM.
Shifters and mech need to be same though (as far as i am aware)
For instance:
I have 5700 10 speed shifters and a shimano 9-speed non clutch, shadow xt mech (M772). This is compatible. But modern 10-sp shimano derailleurs (i.e. Tiagra) have the same cable pull ratio as the 11-speed shifters (i think), and not the old 10-speed variants.
For SRAM, i think is much easier to match the cable pull etc required, and most of their stuff now is 1:1 ratio so all works well. No expertise here though.

For the 44t narrow wide, i used a SRAM Apex 1.

So ultimately, if you have some shifters already then start there with that and look for what is compatible. Otherwise, start from scratch i geuss

@GreenGoat no worries, thanks.
@vilms5000 replying now for you

no worries mate, just let me know

110bcd yes, but BB30 rather than GXP. A BSA30 bottom bracket seems like it would work with your bike (BSA 68mm), and the crankset.

https://images.amain.com/images/large/bikes/fullspeedahead/50-1777-blk-172.jpg?width=950
The outer ring has been replaced a couple years ago, bike was used as commuter. Not sure on wear right now, would need to take a pic.

Example BSA30 BB: https://www.tredz.co.uk/.Race-Face-Cinch-BSA30-Bottom-Bracket_71949.htm

Still looking or sorted? I have an FSA Gossamer crankset to come off a bike and you're welcome to it for cheap

Price drops across the board

freetrade?

I'll take these, PM on its way

Few bits added, pics added. (@Korvell)
Open to offers on all

direct purchases only

Will get some in next couple of days. The spacer kit is blue with I think one sprocket. The other sprockets are silver colour. I assume you want to see the wear though.

Hello, got a few bits to sell that have been acquired in recent months/years during bike building and taking apart, and some stuff that doesn't fit me or bikes.

Shimano bottom bracket - SM-BB72-41B Road press fit (NEW) - £12
Boardman carbon seatpost - 31.6mm, uncut. Cosmetic marks where its been jimmied out - £7?
Incredibell - new and unused - £2
Rapha rain lobster mitts - medium (used less than 5x, too small for me) - £25
Single speed conversion cogs (2x 16t left) all used to some extent, plenty of life left - £couple quid

Shimano bottom bracket - SM-BBR60 BC1.37x24 Road Threaded (NEW) - £SOLD
Bontrager Race x lite seatpost - 27.2mm x 270mm - £SOLD
Tektro RL721 CX brake levers for 31.8mm bars (used, in good nick, little bit of paint scratched off the tip of one lever) - £SOLD
Avid FR5 brake levers for 22.2mm bars - £SOLD

Collection from EC2N (work hours) or Crystal Palace / Gipsy Hill evenings (or somewhere in between). Will post various at buyers cost

Open to offers on all

I have a Basil Portland (newly acquired fron forum). It is supposed to mount on solid axle. I have quick release front, as well as eyelets for rack.
Haven't yet had a chance to try and fit, but on a guess, would either of these options work?
I'm currently thinking either should be fine, maybe with an m5 penny washer between to make it secure...

I have a Bontrager Race X Lite 27.2 that i bought off here and is too short for me (think its about 200-250mm), if anyone is interested for a tenner
@motoko

Sorry, don't have the bike you are after, but 5'9" is 175cm

Confirmed bike should take the rack - pm sent.

I have a tensioner i used for about 1-2 months and no longer need, if you are stuck?

Can I call dibs on rack please, with caveat that I need to check ability for it to mount with disc brakes on my bike?

Can you twist the silver thing with respect to the black thing? Hopefully popping off the cover and then access the light

https://www.amazon.co.uk/dp/B075MG37VZ/

this would suggest yes

Interesting, will loosen that off again then, seems obvious now you think about it.
Will take a look at some of the other things mentioned here. Thanks all.

Just tightening a little further to secure it. I understand that since the stem is secured in place then adding a bit of load to the top cap afterwards shouldn't interfere with the headset tightness?
From memory i haven't overly tightened it, but i guess that could be a potential issue?

EC34/28.6 top cup, ZS44/30 lower cup
Think the parts I bought were nukeproof

Cheers all so far. Bike is brand new (2 months) so doubt steerer tube is bent either, also problem would be constant I imagine.

Tonight it was fine, smooth steering all the way home. Go figure.

Will try and figure something out, half of me thinks it could be cables being slightly stiff/short

Yes - agreed, put it down to disc brakes as it is only rocking when holding front brake only. Not when wheel at 90deg, or back brake on also. Will try to back it off a bit but not convinced this will be the cure, as the issue is a temperamental one - sometimes the steering is smooth as

Frame is brand new, so would doubt that

Will try and get one soon, maybe this evening if i have time.
How do you mean notched/indexed - would this happen out of the box, as this problem was there right from the off