Avatar for Kumo_Cycles

Kumo_Cycles

Member since May 2014 • Last active Jun 2014
  • 1 conversations
  • 4 comments

Most recent activity

  • in General
    Avatar for Kumo_Cycles

    G'day all,

    I am heading from Tokyo to London tomorrow with my bike and am keen to see what the city has to offer!

    Anyone have any recommendations for rides, shops, events or want to go for a ride?

    I'll be around for two weeks

    Kumo Keith

  • in Bikes & Bits
    Avatar for Kumo_Cycles

    The redesigned Grand Bois 650b rims is definitely a great alternative, reasonably light (460g), very easy to mount tyres without levers, and actually mounted correctly when inflated, massive improvements (just did 1200km on them).

    They do look damn good. Plus they don't have the aggressive box section profile of the pacenti rims which were doomed from the start with modern spoke tensions

  • in Bikes & Bits
    Avatar for Kumo_Cycles

    Dinglespeed is great for holiday/travelling bikes. Superfunctional.

    Yeah, road rides, grinding big hills, dirt tracks, light single track and 200km+ camping trips. There are few types of rides I haven't done on this bike

  • in Bikes & Bits
    Avatar for Kumo_Cycles

    He done gone fucked his rims.

    spokes tension is too high and will crack it.

    Look at the first picture, front wheel - assume the bulge in the rim around the nipples is what he's referring to.

    Indeed, the Pacenti rims is very thin, they're great high performance rims, but will crack eventually if the spokes tension is too high over Pacenti's recommended tension, the bulge is normal, but the bulge on that bike is quite big.

    Had a pair, my rear look like his front, but my front have a lots less bulge due to the spacing and lower tension, the front despite having a worn braking surface still remain true to this day and only be trued once after 4,000km.

    But the rear have to be retired after discovering a lots of tiny crack on the spokes hole after 2,500km, that's largely due to the hubs spacing and offset that required a higher spoke tension (130mm with 10 speed hubs).

    Late to the party here, but these Pacenti Rims are turd. Rims start to bulge at a low spoke tension and there have been plenty of reports of them cracking. Apparently they are being re-desgned to rectify the fault but I waiting for further reports.

    Currently trying to bust them so I can rebuild the wheels with a set of Grand Bois 650b rims that I have sourced.

    This bike is currently on holiday with me in Japan, has had a Brooks Cambium put on and is running a double speed drive train with a White Industries dual chainring and two Chris King cogs on the cassette.

Actions