Most recent activity
-
Thanks for the responses...I am using a phil wood hub and cog
-
Is this the neatest solution ? I ask this because it's for a really nice project. So it would be a spacer between the hub and the cog or a spacer for the axle? Also where can I buy these? Do they come in 0,5 mm? Thanks
-
Hi, I have a Rotor 3D Track Crankset with a 43,5mm chainline and a Phil Wood high flange fixed hub with a 42mm chainline.
I want to know the way of correcting this 1,5mm difference in my chainline.
Although I did some research I couldn't find this info.
Tusen Takk !!!
-
Hi everybody !!! I was offered this set of track hubs for U$S 120. I would like to know if someone in this forum knows about them or has tested them. The seller informed me that they are high end hubs manufactured in Taiwan. I later confirmed their origin from the website of the brand.
Doing some research I found the guys at BLB don´t sell their hubs but their crankset and provide the following description:
"This is one high end performance track crank that you have been waiting for.
Used by the Japanese Track Team, the RIDEA 3D Track crank is produced from the finest worldwide materials, including top quality Swiss 7150-T7 aluminium for the crank arms and German 6-4 Titanium for the spindle on the Ti version."
http://www.bricklanebikes.co.uk/rideaThis is the brand website
http://www.rideabikes.com/2014/pro_track_wheel.htmlI have ruled out phill wood due to the high price so I had in mind a set of not very expensive Dura Ace or Paul Components. Do you consider Ridea is better than the mentioned brands?
I wish you guys tons of good rides !!!
Tusen Takk
-
I posted it in bikes and bits and I am trying to erase this post actually
-
Hi everybody !!! I was offered this set of track hubs for U$S 120. I would like to know if someone in this forum knows about them or has tested them. The seller informed me that they are high end hubs manufactured in Taiwan. I later confirmed their origin from the website of the brand.
Doing some research I found the guys at BLB don´t sell their hubs but their crankset and provide the following description:
"This is one high end performance track crank that you have been waiting for.
Used by the Japanese Track Team, the RIDEA 3D Track crank is produced from the finest worldwide materials, including top quality Swiss 7150-T7 aluminium for the crank arms and German 6-4 Titanium for the spindle on the Ti version."
http://www.bricklanebikes.co.uk/rideaThis is the brand website
http://www.rideabikes.com/2014/pro_track_wheel.htmlI have ruled out phill wood due to the high price so I had in mind a set of not very expensive Dura Ace or Paul Components. Do you consider Ridea is better than the mentioned brands?
I wish you guys tons of good rides !!!
Tusen Takk
Many thanks for all the answers !!!
Phil, that is such an interesting work of research ...
Cheers