Avatar for krad

krad

Member since Nov 2013 • Last active Aug 2024
  • 2 conversations
  • 39 comments

Most recent activity

  • in Rides & Races
    Avatar for krad

    Was planning to do this 2020. Have to try in 2023 if you're interested?

  • in Rides & Races
    Avatar for krad

    Hello I've been doing DIYs for a few years. You can use the same route as many times as you like. It has a bevet number once registered and I think you can just keep using that number. As for submitting I do this the night before, audax UK send an auto email that you are entered. Then a few days later the validator emails listed the entry and number of cards I have left. You can enter up to midnight I think the day before.
    My gpx routes go all over the place. I have off-road, walking bits and fast roads. Don't have to worry about the shape of the route if it's gpx submit. Also if you are doing squares from veloview that also make the route planning more interesting. Good look with planning.

  • in General
    Avatar for krad

    I've puts some VO just fit my fork. Also 23mm tyre on 19mm rim give a 25mm width tyre. So 25mm seem to come up at 28mm and the max width on them is 30mm. Make sure you measure everything in advance.

  • in Bikes & Bits
    Avatar for krad

    Looks nice I've done the same on my PDW. What mudguard are you using? It's the size of mudguard which has limited me to 23mm on PDW. Did have 25mm but they rub a little when grinding up the hill. Would like to go back to 25mm or 28mm as 23mm seems to make the bike vibrant more.

  • in Rides & Races
    Avatar for krad

    If it's not down as a perm then don't see an issue. Just submit the gpx as a DIY and that's it. I've done this for some events I've missed.

  • in Bikes & Bits
    Avatar for krad

    Thanks, I did a bit more digging and found that the B +M is for ebike. So it's expected DC volt and won't work on the Dyno. I still have the B+M secular plus attached to my PDW. But the issue is the z bracket keeps breaking and just had enough of that, and 23mm. So the plan is to switch to velo orange black smooth guard and mount a new light to that. But still working out what light and guard combo will work.

  • in Components and clothing
    Avatar for krad

    I would like to sell them both. If someone wants the front then I can split?

  • in Bikes & Bits
    Avatar for krad

    Does anyone know how this light should look on a Velo Orange Mudguard? Can't find a manual or how it would fit on.

  • in Components and clothing
    Avatar for krad

    Front and Rear hub used on 10 speed freehub. No QR sorry. £45? I'm in North London.

Actions