Fartus

Most recent activity

• White industries rear eno eccentric 120mm axle and end caps

  in Wanted Adverts • 3 years, 8 months

  

  Sideways cycles will be able to get some in

  http://www.sidewayscycles.co.uk/

• Which crankset for White Industries ENO Ecc on roadbike?

  @Fartus started

  • 2 comments
  • 293 views

  @JVBulman replied
• Which crankset for White Industries ENO Ecc on roadbike?

  in Bikes & Bits • 4 years

  

  Hi

  I have a 2004 Trek OCLV race frame that I use with a WI ENO Ecc hub fixed. It is by far the most fun bike I have ever owned, but I'm thinking about a more elegant solution for the cranks.

  I'm using a Campag Record dbl with a velosolo ring mounted on the inner position. I can't remember what axle length BB I used but it gives a near perfect chain line. But its fully, and I can only use 4 c/bolts and not the 5th one which goes into the back of the crank arm. I can't put the ring on the outer position (with a shorter bb axle, natch) because the back of the crank spider would foul the chainstay.

  Anybody got any experience here?

• Chain wont run smooth

  in Mechanics & Fixin' • 11 years, 10 months

  

  Spin the cranks, then when it stops have a look at where the chain wheel teeth sit inside the chain. If it is nice and central you've got the right chain line.

  Then go on to see if you chainring is sitting central on the spider by following the Sheldon page

• UCI World Track Championships 2013: Minsk, Belarus

  in Track Cycling and Velodromes • 11 years, 10 months

  

  Looks like he lost his Livestrong wristband too

• UCI World Track Championships 2013: Minsk, Belarus

  in Track Cycling and Velodromes • 11 years, 10 months

  

  Lucky not to get a shard of track up his ass as a souvenir