Most recent activity
-
My new phil wood lockring is too small to lock the miche cog and carrier. In other words the cog can move inside the carrier when I fully thighten the lockring. I could turn the lockring around, letting "the bigger text part" face the carrier. Anyone done this? Bad or good idea?
-
Minoura bottle cage adaptor?
-
That cog was indeed lose when I removed the lockring! All the threads seem fine though... Thanks for the tip!
-
- 8 comments
- 1,158 views
-
No, I did not remove the lock ring. Just tried to rotafix the cog and tried to tighten my lockring a bit more (did not move). Strange thing is that no other skids after the slip made any 'slipping feelings', and forward pedaling did not make a 'slip back feeling'.
Think I'll try to remove lockring, cog and put things back on. Hope no threads are damaged...
-
Hm... That is what i thoughed at first. But the cog should now be lose right? However, I just could not get my cog tighter when I rottafixed after the slip...
-
Today I installed a new miche cog (15t) on the stupid miche adaptor, tightened the lockring etc. However, on the first skid the cog slipped a little. The cog did not "slip back" when I pedalled forward. Next skid no problems with slipping. When I got home from my ride I rottafixed my cog, but the thing seems to be tight...any ideas what happend?
I must note that I only switched the cog, not the adaptor! Did not touch a chainwhip :) had no 'slip' with my old 18t cog...
-
Navigation our gps speed/position recording? Strava is awesome for the latter. You can compare your rides with other users. Racing against each other on segments, lots of fun.
Colnago Master? Which era?