DaveThePainter
Member since Sep 2011 • Last active Jun 2012Most recent activity
-
- 8 comments
- 1.78k views
-
-
700c SOLD SOLD
28h front and rear
rear 120mm spacing / front 100mm spacing
clincher deep section DT Swis RR 1.2 Rims
Goldtec Large flange hubs - Double fixed *
Sapim swiss spokes
Very good condition, see photo's below£185 free P&P or Collection Kent CT6
- See links if intrested in Fixed/Freewheel use......
http://www.timetriallingforum.co.uk/index.php?showtopic=22724
[/COLOR]
[COLOR=#234786]
http://www.lfgss.com/thread72600.html[/COLOR]
[COLOR=#234786]
http://www.lfgss.com/thread9386.html - See links if intrested in Fixed/Freewheel use......
-
Hi all, just replaced wheels on Pearsons Touche, with Goldtec hubs and DT swiss rims,the hub is for fixed both sides, but previous post suggest it's OK to use a freewheel, the 120mm spacing is correct, but with a 16 or 18 tooth freewheel fitted, when push hard uphill there was a light metallic jangle, i thought it may be the new Dicta F/wheel (normally very dry inside) but it was the rear stay twisting slightly and i ended up with a groove in the bottom of the seat stay !!! would a 12mm threaded axle and 2mm washers be a easy fix, if i could find a 12mm axle, or is there a better way ? i would file the axle flat in line with the dropouts, (only 1mm each side)
PS 18 tooth fixed also rubs when pushed
Dave
SORTED.. , new bearings, new axle, X2 3mm spacers....1 hour in garage depending on post, should be fixed by WED's -
-
-
Hi OK, can you send payment request via Paypal, my details will be returned with payment.
a5dpn@yahoo.co.uk
thanks Dave -
i got these from LFGSS, pistoffski, he seems honest long time seller on this site.