Most recent activity
-
I have a pair of size 44 Genius 2 that no longer fit me, in good condition. Velcro and ratchets are all fine. Will post (in Sheffield). See
https://picasaweb.google.com/106668154169381658811/SidiShoes
Nick -
I have a rear hub to match Hilly Ben's above, but it is 28h I'm afraid. Very nice condition shell with a non-original axle. Let me know if that compromise might work.
Nick -
Hi Wayne,
Rally should work with the 7 speed Campag Syncro index shifters, but not with the 8 speed shifters (either Syncro 2 downtube or Ergos). I've tried it; when 8 speed came in, the amount of cable being pulled by the levers was increased.I have one of the Campag MTB long cage mechs (Olimpus --- http://velobase.com/ViewComponent.aspx?ID=00C6A455-D259-483D-84D9-32B124C656BB&Enum=108&AbsPos=48) in perfect condition, but I know it doesn't work with 7 speed index and have been told that it doesn't work with 8 speed either. However, I could check the latter and let you know, since velobase claims it should.
Good luck!
Nick -
Ok so Regina Americas are a no go for indexing.
I've used (and use) America 6 and 7 speed with Campag Syncro index levers, and have not had any problems. I use period Regina chains, including the hollow pin ones. There's a Regina Syncro 90, which I also use, but it doesn't work any better than the America for me.
I've not tried it with Shimano, but I don't see why it wouldn't work.
Sorry, I don't have any for sale though...
Nick
-
Campagnolo double chainsets up to the late 80s can fit a minimum inner ring of 42*, so you can't get a 39. From the late 80s on (Athena, Chorus, etc.), you can have a minimum 39.
-> late 80s: see http://velobase.com/ViewComponent.aspx?ID=835418D8-07C5-4BFF-B006-54EC670E7ECE&Enum=115&AbsPos=42
late 80s ->: see e.g. http://velobase.com/ViewComponent.aspx?ID=5E576976-60FD-40DD-A0C9-03847B68D23F&Enum=115&AbsPos=15
Nick
- there are some non-Campag 41 rings, but certainly no lower than that due to the diameter of the arms.
- there are some non-Campag 41 rings, but certainly no lower than that due to the diameter of the arms.
-
Sorry, I've only got 3/32"
Nick -
1/8" or 3/32"? Might have a 3/32" 42 with some life left in it.
-
^^ Who else has gone and tried that? I can hear the Director of Appropriate Internet Search Surveillance coming down the corridor now.
-
Are the Accushift levers 6 or 7 speed?
Nick
Got one of these Suntour ones in vgc. Nice and smooth.
http://www.srsuntour-cycling.com/dstore/products/Bottom+Brackets/3012/XCM/BB8-XCM-SQS-118-CBT.html
Let me know if any good. £10 posted.
Nick