Most recent activity
-
So it's official, Jaap wil never come out of the shed again to actually ride bikes.
-
- 1 comment
- 377 views
-
#crossiscoming so I need to transfer my gravel bike's parts to a cross frame. One issue: I'm having a hard time finding a good frame.
So here's what I'm looking for:
- Aluminium or carbon frame with a carbon fork
- Cyclocross geometry (otherwise I could just use my gravel bike)
- Stack > 590mm (preferably more than 600)
- Reach < 395mm (preferably less than 390)
- Preferably flat mount
- Internal cables if possible
- Costing up to € 400,- for a frame or a € 600,- for a full bike
- In the case of the full bike I don't care too much about the parts as I will probably sell those anyways.
Any tips or offers are very welcome,
Thanks!
- Aluminium or carbon frame with a carbon fork
-
@Jaap ride on sunday?!?!
-
- 14 comments
- 1,735 views
-
Don't really understand how that would work.
Less fork offset should make for sharper steering right?
Or am I missing something? -
Just haven't been posting anything for a while.
I was considering doing a cp thread all the way through the project, but the actual work was more fun that making a thread about it, so I ended up just doing more work.
I did take pictures of pretty much every step, so when I'm bored some day I might make a thread. -
Thanks!
These are 700c's with 45mm tyres and still plenty of room left.
I think it might take 50mm -
My Arkose getting ready to bring me from Fez to Marrakech in May
painfully true...