Hi
I have a late 90s (I think) straight forked Raleigh 853 Team frame. Recently was about to use a 27.2mm seatpost I was given but would only go in 8cm quite tightly by gentle opening by a millimetre of the seatpost clamp area. Im not going to force it. Does anyone know what seatpost diameter Raleigh used on these frames/tubing of this era? The curent seatpost is stamped 27.0 and I measured the current seatpost with a Vernier calliper and it is 27.0mm.
Frame looks same colour and design as this one but with blue forks as well (I havent got a decent pic yet, sorry)
Anyone have one of these?
Reach negotiable. Not too bothered about the condition as long as its the long as its the 195mm or taller Nitto Technomic Deluxe. 26mm bar diameter. Please quote the height above the min insertion mark.
guess it depends on the frame geometry too but with the Dolan Ribble 653 frame I have, you can feel the road a lot more than the 531c frames. A solid ride.
Hi
I have a late 90s (I think) straight forked Raleigh 853 Team frame. Recently was about to use a 27.2mm seatpost I was given but would only go in 8cm quite tightly by gentle opening by a millimetre of the seatpost clamp area. Im not going to force it. Does anyone know what seatpost diameter Raleigh used on these frames/tubing of this era? The curent seatpost is stamped 27.0 and I measured the current seatpost with a Vernier calliper and it is 27.0mm.
Frame looks same colour and design as this one but with blue forks as well (I havent got a decent pic yet, sorry)
http://www.ibikedb.net/bikes/34598-raleigh-special-products-853-road
Im really asking...is it 27.0mm or has it been forced from 27.2mm to 27.0mm? Anyone out there have the same frame to check?
I dont want to have it reamed just yet
thanks