Avatar for raelmon

raelmon

Member since May 2010 • Last active May 2010
  • 0 conversations
  • 4 comments

Most recent activity

  • in Mechanics & Fixin'
    Avatar for raelmon

    I am planning to use SRAM S-300 crankset in a Curve D3 folding bike. This bike has very little room, so it is important to know the Q-factor on the cranks to make sure my heel doesn't hit the shifter cover of the internal gear hub.
    Could any of you giveme an approximate meassure of what the Q-factor of this crankset is? Thanks

    Ups, Sorry... the SRAM omnium I want to say.

  • in Mechanics & Fixin'
    Avatar for raelmon

    I am planning to use SRAM S-300 crankset in a Curve D3 folding bike. This bike has very little room, so it is important to know the Q-factor on the cranks to make sure my heel doesn't hit the shifter cover of the internal gear hub.
    Could any of you giveme an approximate meassure of what the Q-factor of this crankset is? Thanks

  • in Components and clothing
    Avatar for raelmon

    Sorry, not interested then...but if you could anyway meassure for me the Q-factor (the horizontal width of the cranks, measured from where the pedals screw in). There is no way to find this value all aorund. Thanks, and good luck.

  • in Components and clothing
    Avatar for raelmon

    I am interested in this crankset...I am planning to use SRAM S-300 crankset in a Curve D3 folding bike. This bike has very little room, so it is important to know the Q-factor on the cranks to make sure my heel doesn't hit the shifter cover of the internal gear hub.
    Could you meassure the Q-factor of this crankset for me?

    The BB is 66mm aprox width on the curve D3. Will fit the included BB in my Curve D3?

Actions