Most recent activity
-
i know this sounds like a real bodge. If you can get someone to hold the wheel solid maybe bolted in the dropouts of an old frame. You will then needa sharp chisel make a shrp blow to make a groove in the lockring to help the chisel to grip. Then give sharp blows to try to turn it off. If it doesn't turn off you will eventually cut through the lockring. Be careful youdo not go too far and damage the hub threads. best of luck.
-
can you reach the bottom of the expander with a length of threaded rob. If you can thread it into the expander then fit a washer over threaded rod onto the bottom of the crown on the fork. Then tighten a nut onto the threade rod it mey pull the expander down and loosen the steerer. Good luck
-
Check with Betd they do have some black front track hubs in stock finally
Hi Willo, i will have a look around, i may have one knocking around at work. I will get back to you. Cheers Hobbob