Most recent activity
-
- 2 comments
- 866 views
-
- 4 comments
- 847 views
-
I've got a Campag record threaded headset, and I'm trying to fit an old (mid-90s?) Veloce front brake.
The problem I'm having is that it appears that the hex-nut on the back of the front brake appears to be too big to fit 'under' the headset. By this, I don't mean the mounting bolt that you fit in the back of the forks, but the nut that sits flush with the calipers themselves.
When I try fitting it, I can't come close to tightening the mounting bolt that goes through the fork, as the hex-nut pushes up against the cup of the headset, so that it's nigh-impossible to turn the steerer.
Has anyone had this problem before? Can I just file down one side of the hex-nut? Will purchasing a different front brake solve the problem?
-
All,
I've got a BNIB Campag Chorus triple chainset, 172.5mm, 30-42-53.
£85 posted.Also a 26.4mm Campag aero seatpost, £30 posted.
Will clean up and make some photos of the latter available.Cheers
-
Hey,
I'm looking for a Centaur or Chorus double chainset, pre 2005ish - i.e. no carbon on it!
Cheers
-
PM sent re: seatpost.
-
(ps. I can't delete all that web-trash from under my post - don't know why?)
Ah right - I've been placing a washer there, but it must be too thin to make a difference.
Cheers.