Most recent activity
-
hope with hope gxp adapters. with that you got the spindle fitted properly on metal, not plastic. plus you can adjust chainline via bb spacers for few millimeters...
or (not recommended) buy some shitty ceramic bb from taiwan via ebay, wait 1 month for it and then be disappointed because you can't get them fit tightly because the plastic cover inside the bearing is few 1/10 mm too loose.
and the buy the hope...
-
so are you interested?
-
... it has NJS stamp on the spindle,too. And willl fit 68 definitely because the spindle sais: 68 / 107.
J -
So, lately i measured the BB again.
Unfortunately for me, i cannot combine both so i can offer you the original 107mm Cup'n'Cone from the auction. Because of the lockring, you should be able to fit it in a 68mm BB shell. I just checked it in my track frame with ITA and it should work (both cups screwed in to hold the spindle and there are few millimeters outside to screw the lockring on).
So do you want it?
Joern -
@ Yebo: You could have it if Strider doesn't want it. I offered him first because i read about his struggle...
-
I tried to send you an email because i got a Dura Ace /w french threads to offer. Let me know if you received it: bugoc@gmx.net
does the print on the rear hub really got the wrong direction?
http://www.flickr.com/photos/presskind/8246407031/in/set-72157632173767451/