Most recent activity
-
I have a Gazelle AB Special frame for sale - some pics in this thread
https://www.lfgss.com/conversations/183935/?offset=1175
about 3/4 way down the page. You'd have to put some work into it to get it running, and transfer components over from your frame too. But it would be way under your indicated budget.
-
I have a Gazelle AB Special frame for sale - some pics in this thread
https://www.lfgss.com/conversations/183935/?offset=1175
about 3/4 way down the page. You'd have to put some work into it to get it running, and transfer components over from your frame too. But it would be way under your indicated budget.
-
I have a DOS 16T - 18T freewheel, 16T has some wear but the 18T has had very little use. I'll look for some photos if you're interested?
-
Hi, I have a WI 'DOS' freewheel with 16T and 18T sprockets. The 16T is a bit worn but the 18T has very little use. I can post to Germany no problem, and may even be able to post within Germany in about 2 weeks as I'll be over for work. I'll see if I can find any photos.
-
I have a Gazelle AB Special frame for sale - some pics in this thread
https://www.lfgss.com/conversations/183935/?offset=1175
about 3/4 way down the page. You'd have to put some work into it to get it running, and transfer components over from your frame too. But it would be way under your indicated budget.
-
I have a White Industries DOS 16-18T freewheel that I'd need to dig out. The 16T cog is worn but the 18T has had very little use. I'll see if I can find some photos. Pretty sure I still have the original box as well.
-
I have a Gazelle Champion Mondiale AA Special in 531c tubing. Measurements are:
Seat tube 60cm C-C, 61.5cm C-T.
Top tube 58cm
Head tube 18.5cmThe paint is really ugly and badly faded in some parts. There are also some pretty bad rust spots in other area. However, I've worked on the worst of the rust spots with wet&dry for ~15mins and it cleaned up well. Most importantly the rust is all surface rust and has not started attacking the tubing. The chroming on the stays is generally good, and the Gazelle headbadge is present and in good condition.
I got it from a Dutch friend who had been using it only on a turbo trainer the past few years, which explains the rust and messy paint. The fork isn't original, I don't think, but the chrome is ok, after a bit of cleaning. I have all the headset parts (not in great condition, but usable) and all threads are BSC.
The frame would look great re-done as a single colour with the original chroming left as-is I'd say - good project for someone. In light of the work needed, I was thinking £50?
Cheers,
Gareth. -
Hi Matt,
Could you please measure the seatpost and let me know what size it is? I have the same frame and am struggling a bit to establish if I need a 26.0mm and plenty of elbow grease, or something a bit smaller like 25.8mm.Cheers,
Gareth.many thanks indeed - i'll keep you posted on my progress with it!
Matt
-
Do you still have the Team Banana frame? What size is it?
Ive got a team banana frame just like the above which im happy to sell for £50
I have a Gazelle AB Special frame for sale - some pics in this thread
https://www.lfgss.com/conversations/183935/?offset=1175
about 3/4 way down the page. You'd have to put some work into it to get it running, and transfer components over from your frame too. But it would be way under your indicated budget.