Most recent activity
-
- 5 comments
- 993 views
-
Hello
I had a lovely Van Nicholas Euros Ti frame, and some kind fool in a clio decided to try and run me over at 60mph and put me in hospital fro a night (lucky escape to say the least).
The rear wheel had to be taken behind the shed and shot and the derailleur was knocked clean off leaving the bolt still in the frame. I have removed the bolt and noticed that the derailleur hanger is bent by about 1cm.
Was thinking of using an derailleur alignment tool. Can I do this to a Ti frame -
Hello
I had a lovely Van Nicholas Euros Ti frame, and some kind fool in a clio decided to try and run me over at 60mph and put me in hospital fro a night (lucky escape to say the least).
The rear wheel had to be taken behind the shed and shot and the derailleur was knocked clean off leaving the bolt still in the frame. I have removed the bolt and noticed that the derailleur hanger is bent by about 1cm. My question is what is the best way to bend it back? -
Brilliant:)
-
That's a wicked image. Any idea where it came from?
-
Sexy as F#';k
-
Try the local leisure centre
-
Got an old holdsworth pro done at Armourtex. Shotblasted to remove all rust then powder coated and lacquer for £60.
Very impressed with the work.
Any one know what size bottom bracket a holdsworth pro takes with a 46 tooth campagnola chain ring?
Many thanks. I thought I might be able to do that.
Injuries: concussion, severe bruising to the leg and hips, cuts to the knees and my pride. Nothing that a good dose of morphine didn't fix whoooozzz!
Three others got totaled by him as well, but hopefully the police will come down hard on him.