Most recent activity
-
Deep section track wheels from Stayer built on Zenith hubs. Nice wide rim profile and tubeless ready (with tape installed). Rear hub is fixed/fixed and front rim has a braking surface.
Used predominantly on the track at Herne Hill (so they have seen the occasional wet ride), although I occasionally used the front on my TT bike (so the braking surface has been used, albeit lightly). Low mileage so bearings very smooth.
Overall very good condition - run true and threads very good. There are a couple of scratches on the front wheel which are pictured.
£575
-
Price drop £60
-
Yes now sold
-
Hi,
No - no issues with it slipping.
-
Early 90's frame with Reynolds 525 tubing. Seat tube 56 cm c-t, top tube 54 cm c-c. Rear spacing is 130 mm so easy to set up with modern parts. Rear brake routed internally, takes a 26.8mm seatpost, weighs around 2kg.
Sold as seen - no fork, headset or cable stops. £80 ono, collection from Catford.
-
Owned from new and used at Herne Hill for a few years - fitted a front brake to go to and from the track hence the paint loss at the brake hole.
Frame pretty clean although has a few small paint chips here and there. Never came off it so functionally and cosmetically good. Includes frame, fork, seat clamp and headset (not the smoothest but still good).
Note: I had issues with the frame filling with rainwater - tended to wash grit up into the seat tube when the bike was hung up which caused seatpost ticking issues. I eventually drilled a hole in the BB shell to allow it to drain. Never properly solved the ticking, but it probably wants a good clean down inside the seat tube and may be fine with a different seatpost and enough grease or grip paste. Anyway, this is reflected in the price.
Will take £85, collection from Catford, or will ship at buyer's expense.
Now sold