Most recent activity
-
Hey,
I'm installing a rigid fork on my XC Mountain bike and the forks come with a 100x15 axle.
It's a DT swiss 240s 6 bolt-boost hub, so i was planning on using these end caps HWGXXX00S4468S
but on a website it says that it's to convert from QR to thru axle, not reduce from Boost to TA. Is it really a problem? -
Amazing! I wish it was a 56. GLWS!
-
Looking for a rigid carbon fork in BOOST format. Any recomendation?
Ideally 480 ace to crown to replace a 100mm suspension. -
Well hammer didnt do shit. I'll see if I can get a dremel and the tool you were mentionning from a friend.
I drilled and remove the first plastic seal, thinking it would help but it just revealed more junk.Edit : placed the frame between two pieces of furniture. Asked a friend to brace it and then hammered like my life depended on it. Finally got it out :]
-
Well thanks for the tips, it's too late to hammer anything without causing drama with the neighbors but I'll give the wood/hammer method a go tomorrow.
-
taking the drive side bearing out of the shell with the now free NDS inner race.
Can't access the drive side bearing, it's blocked by the chainring :/ (shimano XT, cant remove with the cranks on)
@M_V not moving at all. I might go buy a dead blow hammer tomorrow to see if that works ...
-
Hey Guys, any tips on how to get this crank arm out? It's completely seized. I tried hammering it with a rubber mallet but the frame being carbon I didnt insist. It didnt move at all...
I soaked it in W40 overnight, still no movement. -
The direct line Paris-Barcelona doesnt have any night train.
If you rly want to travel by night, there are some other options with 1 to 3hrs layovers (usually early morning) -
Any recommendations for a rigid 29" boost carbon fork ?
I'm finding a few but low number of orders and not many reviews
:)