MTB colossal clearout part 2:) All modern kit: Thomson XT Mavic SRAM Race Face etc + mucho freebies PRICE DROPS

THREAD UPDATE: price drops all round- £5 off everything costing £25+, a few £££ off everything cheaper than this, see each item for exact price.
NEW UPDATE: for those buying multiple items, get a few £££ off the cheapest one, will advise of the exact discount once I know the particular item being bought.

Since the New Year I’ve had a complete reassessment of my massive vintage MTB bikes/parts hoard after deciding that it’s got a bit out of control and most of it has to go😊 I’ve cleared a lot of the vintage stuff already, but now the modern kit of the collection is up for grabs here. The vintage stuff was listed in a separate thread to this- it’s still open, so if this is more your line then look here: https://www.lfgss.com/conversations/395390/
Loads of nice freebies can be found too. Prices not including postage. Collection is welcome . Dibs then PM please. To make things easier (compared to the earlier thread) I’ve not included pics of everything alongside the items, but they can be found in this photo album: https://photos.app.goo.gl/mXVZBGDz87kxxWz8A
This shows one or two pics per item but more will be added as I find the time.

I’ve also only included basic spec info for everything, please ask for extra info if it’s needed (can also get extra pics sorted more quickly for individual items if you'd rather not wait for the full update). And for the most part, condition info hasn’t been mentioned, but please be reassured that everything has been checked over carefully and mechanically all parts are in good order (all pivoting bits on front/rear mechs, brake levers etc won’t have play, no bolts will be seized, threads will be good, hub bearings will be examined for wear and serviced, and nothing will be damaged/bent etc) besides cosmetic scrapes etc which will be shown in close-up pics.

Paypal gift is my preferred payment type, all prices don't include postage. Royal Mail's standard 2nd class rate is £3.69, so this is what you'll be paying unless you ask for a different service. Possibly cheaper if it fits inside a letter envelope, ask for price. If you can collect then it will be from NW London. Happy to send outside of the UK at cost, PayPal "friends" (or you can choose the standard method, ask for it and I'll advise what is required for this) payment secures, cold hard cash only (so no trades or offers will be considered) I'm afraid folks. I’ll be making another forum donation once the new stuff starts to shift.
NB PLEASE CHECK AT THE END OF MY SECOND POST IN THE THREAD FOR ALL ITEMS SOLD OR FREEBIES TAKEN. ITEMS DIBSED/PENDING SALES SHOULD BE CHECKED BY LOOKING AT THE THREAD REPLIES BELOW, PLS DON'T PM ME BEFORE CHECKING THIS

REAR MECHS (SGS below equals a long cage design; GS equals medium cage)

Shimano XT Shadow RD-M786 SGS rear mech. This is a clutched rear mech, allowing it to reduce chain bounce (between jockey wheels and chainrings) causing chain slap against your frame when riding over rough terrain. And also prevents it from falling off the chainrings. This function can be locked out when going back to normal terrain. 10 speed. £30
Shimano XT Shadow Plus RD-M781 SGS rear mech. Non clutched variant of the above mech but still retaining many of it’s features. 10 speed. £30>>> £25
Shimano XT Shadow RD-M772 SGS rear mech. 9 speed. £25>>> £20
Shimano Deore RD-M510 rear mech. This is a long cage mech although appears more like a medium cage when compared to the more ‘serious’ MTB mechs above. 9 speed. See my other Deore kit below which makes up probably a complete Deore (same M510 series) groupset. £10>>> £8
Shimano Alivio RD-MC20 rear mech. 8 speed. This is a long cage mech although appears more like a medium cage when compared to the more ‘serious’ MTB mechs above. See my other Alivio kit below which makes up probably a complete Alivio (same MC20/18 series). £10>>> £8
Shimano SLX RD-M662 GS rear mech. 9 speed. Has been upgraded with alloy KCNC sealed bearing, 11 tooth jockey wheels. £15>>> £13
SRAM X-4 rear mech. 8 speed. Long cage. If interested, I also have some 8 speed shifters (not listed below) I can sell to the new owner which would be compatible with the mech’s unusual 1:1 actuation ratio. £10>>> £8

FRONT MECHS

Shimano XT FD-M780A low slung front mech. Bottom or top pull. 34.9mm clamp, but includes shims for 31.8mm. Will obviously be a good match for the other XT M780 kit listed here. £15>>> £13
Shimano Deore FD-M510 front mech. Bottom or top pull. 34.9mm clamp, but can include shims for 31.8mm. Will obviously be a good match for the other Deore kit listed here. £8>>> £6
Shimano LX FD-M580A low slung front mech. Bottom or top pull. 34.9mm clamp, but can include shims for 31.8mm. £10>>> £8
Shimano Deore FD-M591 front mech. Bottom or top pull. 34.9mm clamp, but can include shims for 31.8mm. Will obviously be a good match for the other Deore M590 kit listed here. £12>>> £10
Shimano Alivio FD-M431 front mech. Bottom or top pull. 34.9mm clamp, but can include shims for 31.8mm. Will obviously be a good match for the other Alivio kit listed here. £8>>> £5
Shimano Alivio FD-MC18 low slung front mech. Top pull. 34.9mm clamp, but can include shims for 31.8mm. Will obviously be a good match for the other Alivio MC20/18 kit listed here. £8>>> £5

SHIFTERS

Shimano XT SL-M780 trigger shifters. Band on. 10 speed. Switchable between triple and double setups. There’s a slight crack to the casework of the l/h shifter (see pic), still very solid. £35>>> £30
Shimano XT/Deore SL-M780/M610 trigger shifters. These are mismatched shifters but look good together thanks to the v similar designs of each. I Spec B mount. 10 speed. Switchable between triple and double setups. £25>>> £20
Shimano Deore SL-M590 trigger shifters. Band on. 9 speed. £15>>> £13
Shimano Acers SL-M360 trigger shifters. Band on. 8 speed. £12>>> £10
SRAM X-9/X-7 trigger shifters. These are mismatched shifters but look good together thanks to the v similar designs of each (externally the only thing different is the model number on each). Band on. 9 speed. £15>>> £12
SRAM 9.0 SL grip shifters. A set of SRAM’s better grip shifters they made. A nice solid shifting action. The grip parts extend out farther than the standard grip shift models in order that shifting can be performed whilst holding the bars in different places/for when the rider prefers not to change his hand position on the bars in order to shift. There’s also separate extensions acting as the normal grips allowing the rider to hold the shifter part and grips at the same time (to avoid accidental shifting maybe). £25>>> £20

BRIFTERS (both have the correct pull ratio for v brake usage)

Shimano Deore ST-M510 combi brake lever/shifters. 9 speed. Some scuffing to the gear indicator windows but otherwise very clean. £30
Shimano Alivio ST-MC18 combi brake lever/shifters. 8 speed. Some scuffing on the bands and logos but otherwise very clean. £25>>> £20

BRAKE LEVERS (all have the correct pull ratio for V-brake usage and one set also works with disc brakes. Well, possibly all the sets are compatible with both, but I've only been able to confirm that the T4000 ones are for sure)

Shimano Deore BL-M510 (silver) brake levers. £15
Shimano Deore BL-M511 (black) brake levers. £15>>> £13
Shimano BL-M420 brake levers (black). £10>>> £8
Shimano Alivio BL-T4000 (grey) brake levers. Shimano’s tech sheets on the web describe these brake levers as being suited for use with either V-brakes or mechanical disc brakes. £15>>> £13
Tektro TK brake levers. Unused and never been fitted to a bike, although original packaging now lost. Virtually unmarked. £10>>> £8

CHAINSETS

Shimano XT FC-M780 chainset. Hollowtech II design so external bottom brackets only (one for sale below). £50>>> £45
Shimano Deore FC-M510 chainset. Octalink design so has splines for accepting Octalink bottom brackets only (one for sale in another of my sales threads, see link in thread’s opening paragraph above). £30>>> £25
Shimano FC-M440 chainset. Square taper design. £20>>> £18
Specialized Strong Arm chainset. Square taper design. £15>>> £12

PEDALS

Shimano FC-M530 clipless double sided pedals. £15>>> £13
Shimano SPD pedal converter. This converts double sided SPD pedals into one sided SPD ones. Useful when you don’t want to have your shoes clipped in for some of your journey. Free if buying any of the below pedals (not needed for the above ones).
Shimano FC-M520 (black) clipless, double sided pedals. £7
Shimano FC-M520 (silver) clipless, double sided pedals. £7
X2 pairs Shimano FC-M515 clipless, double sided pedals. £7>>> £5
NB also have x2 sets of used SPD cleats if they're wanted- £3. Will add pics soon
Onza VP458A bear trap pedals. Double cage, alloy construction pedals, very grippy and light. They look pretty much as new although there’s a few scuffs to the paintwork along the centre on one side of one of the pedals, plus the usual wear on the teeth. The box included isn’t the original one. £20>>> £18
Crank Brothers Egg Beater Chrome pedals. Used pedals but still boxed with original unused cleats and fitting hardware and instruction manual. Some of the cleat bolts aren’t showing in the pics but I will find spare ones I have and provide these to the new owner. There is some chrome loss on the axle of one of the pedals but they still look quite tidy. £30>>> £25

BARS

NL riser bars and Jalco stem. No branding or design on the bars besides the end stampings. Bars are oversized with a small rise. No cut down, 660mm width. Stem is 60mm long. £10>>> £8 (postage will cost more than stated in opening paragraph due to bulky size).
M:Part flat bars. 25.8mm clamp so will fit 25.4mm diameter bars as well as sizes up to 25.8mm. Probably 3° swayback. Bars have been cut down and the length is no 500mm. Some crimp marks from overtightening bar ends but they still fasten on without issue. £8>>> £6 (see above bars re postage cost).

ROTORS

Avid G2CS “Clean Sweep” disc rotor. 180mm. Very little usage. Can include new attachment bolts if they’re required. £6>>> £4
Shimano SM-RT56-S disc rotor. 160mm. Very little usage. Can include new attachment bolts if they’re required. £6>>> £4
Shimano SM-RT66-S disc rotor. 160mm. Very little usage. Can include new attachment bolts if they’re required. £6>>> £4
Shimano SM-RT56-M disc rotor. 180mm. Very little usage. Can include new attachment bolts if they’re required. £6>>> £4
X2 Tektro disc rotor. 180mm. Very little usage. Can include new attachment bolts if they’re required. £5>>> £3
Tektro disc rotor. 160mm. Very little usage. Can include new attachment bolts if they’re required. £3>>> £2

CHAINRINGS AND BASHGUARD

FSA outer 42t alloy chainring. 94mm BCD. £10>>> £8
Race Face Racering steel 22t granny ring. 4 bolt, 64mm BCD. New with original packaging and sticker! £10>>> £8
Race Face 24t steel granny ring. 4 bolt, 64mm BCD. Very little usage. £5>>> £3
X2 Raceface Outer rings. Both 5 bolt rings. One is 46t and 110BCD. The other is 42t and 96mm BCD. The larger ring is starting to show wear but still many miles left on it. The smaller one has done less miles but is pretty dirty and stained. 46t ring: £8>>> £6, 42t: £10>>> £8
Shimano SG-X 46-G 46t outer ring. 5 bolt, 110mm BCD. Very little usage. £12>>> £10
Shimano SG-X 32t steel middle ring. 4 bolt, 104mm BCD. Very little usage. £8>>> £6
Shimano SG-X 48t outer ring. New and never fitted, although original packaging now lost. 4 bolt, 104mm BCD. £15>>> £13
Shimano SG-X 44t outer ring. Virtually unused. I believe this was originally on an XT 9 spd chainset. 4 bolt, 104mm BCD. £12>>> £10
X2 Shimano SG-X 22t granny rings. One silver, one black, both steel. 4 bolt, 64mm BCD. Very little usage. £3 each>>> £2
Gerhardt 34t middle ring. Shows signs of usage but it’s minimal. 5 hole, 96mm BCD. £8>>> £6
X2 Blackspire 22t granny rings. One silver (steel), one black (alloy). 4 bolt, 64mm BCD. The steel (Chuckring model) ring is new but has lost it’s packag-ing. The alloy ring is showing signs of wear but it’s minimal. £5 each>>> £3 each
Blackspire Pro Series 24t granny ring. New with original packaging. 5 bolt, 74mm BCD. Apparently for 8 speed chains. £10>>> £8
Deckas narrow wide chainring. Obviously for x1 setups. 32t, 4 hole ring and 104mm bcd. Virtually as new condition. £10>>> £8
Unbranded bashguard. No branding but looks good quality going by the CNC’D paring of the metal to reduce weight and nice ano finish. A few light scuffs but pretty new looking. 4 hole, 104 BCD. I’ve matched it to chainrings and it’s large enough to guard a 34t ring and possible a few teeth more. £10>>> £8

FREEBIES

1 pair of alloy 11t jockey wheels. Marked “for Shimano” and 8.10mm so I guess this would tell you the speed of chain/cassette they’d be compatible with. Think I also have blue bolts to go with these somewhere. Marked with a brand logo that looks like an A (no idea…)
I pair of rubberized bar ends. Unbranded but in pretty excellent condition.
X3 seatpost clamps. I think two are for 34.9mm posts, one for 27.2mm.
Dia Compe Dia Tech headset fitting brake cable stop. Fits 1 1/8” steerers.
One pair of steel suspension fork springs. Feel very light so I’d have thought they could be butted steel or some kind of steel alloy, look to be good quality anyway. Don’t know which forks they came out of.
One pair of brake shoes and pads, unbranded and unused.

GRIPS

Ritchey Comp Trail slide-on grips. New with packaging. £5>>> £4
ODI slide-on grips. New but no packaging. £3>>> £2

STEMS

Thomson Elite X4 stem. Virtually as new, bar a couple of tiny marks possibly too small to be seen in the pics. For oversized 31.8mm bars and 1 1/8” steerers. Length 100mm. Not sure what the upward angle is but possibly 6°? £40
Race Face Evolve AM stem. For oversized 31.8mm bars and 1 1/8” steerers. Minimum upwards angle. Length looks to be 85mm. £15>>> £13
Kona stem. For 25.4mm bars and 1 1/8” steerers. Length looks to be 90mm. £5>>> £3
Art stem. A classy looking stem finished in a subtle matt midnight blue ano colour. Pretty new looking too, with only one or two tiny marks to be seen. Length 125mm, for 1 1/8” steerers and for 25.4mm bars. £12>>> £10

CASSETTES

Shimano Acera CS-HG41-8 8 speed cassette. New in packaging. 11/32t ratios. £15>>> £13
Shimano Deore CS-M580 9 speed cassette. New but no packaging. 11/32t ratios. £20>>> £18
Shimano Tiagra CS-HG50-9 9 speed cassette. New but no packaging. 11/32t ratios. £20>>> £18

SEATPOSTS

Bontrager Nebula seatpost. 27.2 diameter. Length looks to be around 300mm. £10>>> £8
CS dropper seatpost. 27.2 diameter. Length looks to be around 300mm. Looks to have hardly been used, although there’s a scuff from the suspension action. Suspension preload is adjustable. £15>>> £13

BRAKES

Shimano Deore BR-M510 V-brake set. A full set of these brakes. One pair is un-used and comes with new/unopened hardware/noodle etc. The other pair looks to have had v little usage with virtually no marks. It has non original hardware and noodle (the bolts are the correct colour though). £30

WHEEL

Mavic X317 Disc 26” front wheel with original skewer. For centrelock disc braking (no disc included, but I can supply one for a little extra). Rim laced to a Shimano XT HB-M765 hub. Rim is in excellent condition and has had an easy life. Hub bearings have been serviced and show virtually no wear, almost new looking. £40>>> £35

HUBS

Shimano XT FH-M765 rear hub. This belonged to the wheel which was paired to the above one (until a spoke nipple pulled out of the rim sadly). It is in a similarly immaculate condition to the front hub, as obvs as also had an easy life. So bearings have been serviced and are fine. Freehub clicks loudly and spins sweetly. It’s a 36 spoke hub and OLN is 135mm. Also for centrelock discs braking (no disc included, but I can supply one for a little extra). This can take a 10 speed cassette, not sure about 11 etc. I have a black XT skewer I’m selling separately which may well match the hub, so can sell this too if it’s wanted. £30>>> £25
Shimano Deore HB-M525 front hub with matching skewer. New large flange hub in unused condition, although unboxed. It's in mint condition with no giveaway spoke hole markings to indicate spokes were once fitted, but all the same I've checked the bearings to make sure there's no signs of usage and they're untouched. 32 spoke holes, fits a 6 bolt disc rotor. The skewer matches the hub but it isn't new as it's a spare one I had available. £15>>> £13
Shimano HB-M495 front hub. Another centrelock disc rotor hub (no disc included, but I can supply one for a little extra). The bearings have been serviced and are pretty new looking. It’s a 36 spoke hub. I likely have the original skewer for the hub and will include it with the sale if it’s wanted. £10>>> £8

BOTTOM BRACKET

Shimano SM-BB51 bottom bracket. For Hollowtech II cassettes. English threading. Has the correct MTB spacing between the cups. Spins pretty much as new. Comes with a spacer although not showing in the pics. £15>>> £13

SOLD ITEMS

Shimano Deore BR-M510 V-brakes
Shimano Deore BL-M510 brake levers (silver)
Shimano Deore ST-M510 combi brake lever/shifters
Shimano FC-M520 pedals (black)
Shimano FC-M520 pedals (silver)
Thomson Elite X4 stem
Shimano XT Shadow RD-M786 SGS rear mech

*FREEBIES TAKEN*
Shimano SPD pedal converters

hi could i please take the deore brakes and matching levers. will dm you now.

I'll have the M520 SPDs, whichever colour is in best condition please! will DM now.

Interested in Alivio 8spd bits - will PM this evening after work if it's still there!

dibs on :
Shimano SM-RT56-S disc rotor. 160mm. Very little usage. Can include new attachment bolts if they’re required. £6
Shimano SM-RT66-S disc rotor. 160mm. Very little usage. Can include new attachment bolts if they’re required. £6

Dips on:
Shimano FC-M520 (black) if poss. DM Sent

Thanks, but not seen anything come through as yet? Still have all the Alivio stuff.

Shimano BR-M510 V-brakes
Shimano BL-M510 brake levers (silver)
BOTH SOLD

Dibs on Deore ST-M510 combi brake lever/shifters, PM sent - thanks

Deore ST-M510 combi brake lever/shifters
Shimano FC-M520 pedals (black)
Shimano FC-M520 pedals (silver)
ALL SOLD SOLD SOLD
Freebie Shimano SPD pedal converters
TAKEN
Dibs on Shimano SM-RT56-S disc rotor, 160mm and Shimano SM-RT66-S disc rotor.,160mm
CANCELLED.

Hi, is this still avail? If so I’d like it. Up in Glasgow so would need posted. John

Shimano SG-X 48t outer ring

.

Dibs on the Shimano XT Shadow RD-M786 SGS, might be interested in some other bits…

Yup, still available. And am happy to post it. Drop me a PM to discuss.

Shimano XT Shadow RD-M786 SGS rear mech SOLD.

Best I can tell the Thomson Elite X4 stem is still available. Dibs on that. Please confirm and I’ll DM. Thanks!

Yup, still available, drop me a dm when you're ready.

Thomson Elite X4 stem SOLD.

Hi, is this chainset still available? If so what is the length of the cranks please? Thanks.
Shimano FC-M440 chainset. Square taper design. £20

The chainset's still available, thanks. Crank length is 170mm. Drop me a pm if that suits.

Thought it was about time to get this stuff moved on, so price drops on everything. No more after this as the stuff was pretty keenly priced to begin with, anything still remaining will be off to ebay.

Great - Will PM you now

NEW UPDATE: for those buying multiple items, get a few £££ off the cheapest one, will advise of the exact discount once I know the particular item being bought. No more discounts after this as will be adding a small batch of extra items soon, plus extra photos for some of the existing stuff being sold, and then listing unsold stuff up on Evilbay.
NB for those interested in a classy vintage tourer, see my Youngs bike up for sale over on the other forum: https://www.lfgss.com/conversations/397905/