Surly Straggler Large steel commuter touring bike

This is my fully custom-built destroyer of gravel and Randonneurs wet dream. See full spec below, any questions please ask.

• Surly straggler steel frame with Chris King threadless headset and top cap, HOPE silver spacers.
  
• Wheels are custom built HOPE 20 Five rims with Sapim Spokes. Rear hub is HOPE PRO 4, front hub is SP Dynamo PV-8 hub, tires are Clement Xploro MSO 40s, HOPE skewers.
  
• Ritchey classic D bars with Brooks leather tape, Thompson 10 degree 100mm stem, Thompson Seatpost, HOPE Seatpost clamp
  
• HOPE 4 arm crank with 24mm axel, Race Face Cinch BB
  
• Ultegra 11 spd 6800 long cage derailleur with Wolf Tooth RoadLink to make it reach the 11-36 SRAM lowest gear.
  
• 105 11 speed 5800 shifters
  
• TRP Spyre disc calipers and HOPE rotors
  
• Finishing accessories include SKS full-length guards, WALD basket attacked to a separate rack which works much more securely than the Mecano arms WALD provides. Custom fitting for extra neat Dynamo light which is an IQ-X Silver headlight. It also comes with an integrated CRANE bell as a headset spacer. The bottle cages are both King Cage Titanium
  
  

Since these pictures were taken - the Brooks saddle has been swapped out for a Selle Italia stripped back carbon saddle (pictures on request) and I'm chucking in some chunky flat pedals. The brake cables could do with replacing simply from being stored (in a dry indoor environment) for a bit too long right after cleaning so some liquid may have been sat in the cables.

Looking for £1200 ONO, can deliver in London

5 Attachments

morning, what is the arms length for crankset?

170mm crank arms

What size is the frame?

the whole bike is a bargain, GLWS

Dibs crankset if split :)

EDIT: Wrong length, UNdibs

Provisional dibs, pending size

Hi mate, I have centre of BB to top of seat clamp at 59.5cm and seat clamp to floor approx 85cm

Thanks, do you know which overall size it is? 54 / 56 / 58 etc? If not, could you measure the top tube as per the geo chart on the Surly site? Cheers

Hey man, so the frame is second hand and at a guess maybe 5 years old. I built it up with new parts and have done 2,000k on it roughly. Having a look at the geometry I think it’s most likely a 58cm. I will measure the top tube for you when I’m back tonight.

Thanks. Looking at this, you might be able to flip it over and read it on the BB shell.

Top tube from weld to weld measures at 56 and tip of saddle to centre of bars is 54. BB shell reads 56

Thanks, I'll PM you.

Yeah man PM me and I’ll give you my WhatsApp

Second dibs

A novel way of measuring frame size.