(Sold) Low trail budget rando cromo non rolling skeleton/frame plus parts size 55 bundle (located in Berlin)

Changing my frame, so this one and some of its parts are for sale.
As the fork that makes the bike came from here I post it here before I go local.

Its a basic steel frame from cnc bikes with a masi low trail fork from on here (and an extra arkose carbon fork).
Built up it looked like this:

If I measured correctly it has a stack of 51 and a reach of 54. Angles seem to be 75.
The frame is painted with le tonkinois, which is basically a fancy linseed oil.
Built up like on the photo the whole thing without bags and bottles weighed 13,80kg.
It has a 44mm headtube, a pressfit bottom bracket and is mounts.
I drilled a hole for the rear light cable close to the headtube, the cable exits under the bottom bracket.
The oil/lacquer is very rough in spots, but should be nice again with one fresh coat.
Frame was rust proofed with car stuff.
So for 350€ plus shipping, everything in the picture of the frame on the stand:
-Frame
-Masi forks
-Pizza rack with rusty lamp holder
-Ritchey EvoMax in 42
-Easton Stem in (I think) 95mm
-Uberbike ceramic headset
-Ugly Fsa Adventure cranks 48/30 (Big ring and BB are dead; but I have a fresh 46 and, if I can find it, a 32)
-A lot but not quite enough spacers
-China special carbon seatpost
Plus:
-Arkose carbon fork with tapered steerer, 50mm offset, ca 20cm os steerer. One eyelet is loose, has scratches because 650b 47mm is tight, and I don't know where the crown race is.
-the not quite fitting clamp for the derailleur (if I can find it), same goes for the carbon fork crown race.
-the very nice bigXtop rando bag (38x27x22cm). Its a bit wide with brifters and 42cm bars but very roomy. Also the white lining is not white anymore. RSF patch included. I will miss this bag!
-some of the le tonkinois stuff.

I will clean everything when I take it apart/before shipping.
At the moment I'd like to sell everything in one go and think I priced it accordingly.

Hopefully more pictures of parts/details:

5 Attachments

Nice bike.
I will take Rando bag if you split, please.

Good looking bike, I'll take the masi-fork and bars if you're willing to split!

Pm'd

Thanks all, it was a nice bike!
Frame also has interest, so looks like there might be a split happening, which means I have think about individual prices later today.
Basically all the hot stuff has dibs as was expected.
Still would prefer complete, but we all know how it is.
And shipping to the uk gets disproportionally expensive quickly.

Took more measurements. Those might be slightly off, especially the angles and stack/reach because its not easy to measure those when your floor is uneven.

If I measured correctly it has a stack of 51 and a reach of 54.
TT horizontal: 54,5
TT: 54
ST c-c: 49,5
ST c-t 53,5
Steerer 12
Wheelbase 1002
bb drop 8 (with 650b 47mm)
Seatpost 31,6

Also the frame has outers all the way, so I had to get creative with cable stops for the front derailleur.
It worked nicely.

Have a new one of those guides somewhere. You can also see the dynamo cable here.

Pm'd for Frame + Carbon Forks

Looks like Oatmeal bought almost the whole bundle and I am left with just the Arkose forks.