WTD: Carbon Headset Expander/Plug/Wedge + 1 1/8" Crown Race

I'm after both these items for a 1 1/8" fork. The crown race mustn't be a split ring. Please have a pic handy. I'd appreciate it very much.

I have a couple of spare bungs.

You can have this FSA one at no charge - but a forum donation would be appreciated.

As for your crown race, well, I wish it was that straightforward.

The angle of the crown race depends on the bearings which will sit on it.
If your headset is using ball bearings, the crown race will have a "curve" and you can't use a split one as 1) they don't exist; 2)the ball bearings would get stuck in the split.
If it has sealed bearings then having a split is not an issue but angle is. Either 36° or 45°.

I have this full 1 1/8th headset you can have too.

Pick up from New Cross

3 Attachments

Hi Vince, that's an excellent offer. Thanks, though I will need posting.
The threaded headset appears to be a 1", need 1 1/8"?

The headset is a 1 1/8 threaded, off an old hybrid.

Due to the current queues at Post Offices in London (1 hour+ then current postal delays are 5 working days), I will unfortunately not post.

I would suggest you get these new off Sigma, they are £3.80 new.

https://www.sigmasports.com/item/Sigma-Sports/Carbon-Fork-Steerer-Bung-Top-Cap-and-Alloy-Bolt/37MK?

If you call Sigma, they will sell you crown races too.

EDIT: I do not want to post and do not want money for the parts - pick up from New Cross only