Mix of cheap/free stems, seatposts, bar-ends, levers, forks &c &c

Here's a mixed bag of things I got and never used. Some cheap, some free, all available in central London with a bit of notice. No postage because cheap/free. Dibs and immediate overpayment is fine : )

Bar-ends:

Dura Ace SL-BS79 10-speed bar-end shifters. RH is indexed, LH is friction.
I bought these used on here but never did anything with them. They have scratches and blemishes that you'd expect from usage.
£15

IGH!


Shimano Nexus SG8R-36. New. 8-gear hub for a 36-hole rim. Includes the matching grip-shifter.
Pic shows a slight cosmetic ding from storage.
£45

Stemz...

from top to bottom:
(All 25.4 clamp, 1+1/8th steerer unless noted)
MTB quill - 1" steerer - FREE
On-One 100mm 6° - FREE
Ritchey Pro 120mm 6° - £7
Ritchey Pro 130mm 6° - £7
Deda -slightly stealthed- 130mm 6° - £7
Cinelli Ant - 31.6 clamp - 60mm 6° - £7
No-brand - 60mm 6° - FREE
or everything for £20

Drivetrain:


175mm Hollowtech II mismatched chainset
R/H is Ultegra 6600 - 130BCD
L/H is Tiagra 4600
Includes preload cap thingy. Perfect for single speed japes, which is how I used it.
£15

Seatposten:

Kalloy Uno - 28.6mm 350mm - unused £5
Ritchey Pro - 27.2mm 350mm - very used £5
For reference, the Ritchey feels like it weighs half what the Uno does. It's a nice way to remove some grams but still have your ride look like a rolling trashcan.

Barz:

Deda Crono Nero bullhorns 31.7mm (that's what it says)
A tad over 400mm centre-to-centre. No rise. Dead flat. Drilled for cable routing.
£10

BrandX 31.8mm narrow/small drops 420mm
Unused (okay, mounted in a stem then removed).
£10

FSA Energy Compact 31.8mm narrow/small 380mm
Used through one winter. Tape residue and screenprint peeling ahoy.
£5

Deda Piega 26.0mm 435mm centre-to-centre.
Unused
£5

Or all the above for £20

Three forks:

1" no-name 700c carbon straight fork with 230mm alu steerer and Cane Creek S2 headset
Drilled for a caliper brake. Suits up to a 28. 25 with a mudguard, I'd say, to be safe.
A great way to ruin your classic steel frame and cheap enough to laugh it off when you pass through that particular mid-life crisis. Some scratches and paint removal. But sound as a pound otherwise.
£20

1" no-name 700c steel touring fork with a short steerer!
Chunky unicrown with bosses for cantis/mini-vs, as well as places to mount baggage and whatnots. Fits a big tyre. Has slightly more than 140mm of steerer, threaded. It's got a star nut installed too. Your choice how/what/who/what/when.
Indestructible, but obviously very ratty condition.
£5

Thorn 1+1/8" 26" full carbon fork with rear-mounted v-brake bosses and a host of touring mount options. 50° of rake. 310mm of steerer. Compression thingy included.
I dunno. I bought it. Looked at it. Tried to think how I'd use it. Put it away. Took it out every few months and went "hmmmm". It's got lots of potential. I just don't see me ever using it.
A small paint chip at the fork crown. One of the rivnuts is loose but could be glued back into place. In fact I could epoxy it for you, I just want to be clear it's like that because that's how it arrived from SJS!
£60

Misc free stuff:

Tektro drop levers
Both the sets have a spring missing in the LH lever - but one has been rigged with a tie, the other holds tension when attached to a brake. They work.

A single SRAM bar-end lever
One of a pair that came through a crash. One made the crossing, leaving this one in permanent retirement.

A single chunky Snafu BMX lever
Pair up with the SRAM lever and give your osteopath a whole new set of things to fix!

Avid BB7_MTN calipers
Disk brakes are dead, ya knarr?

Shimano PD-R540 road pedals.
I use MTB pedals. These are not MTB pedals. Sooo.

Ah Dropbox, with the ol' rotate-not-really-rotating fun-and-games.
If you need better pics, message me. Thanks...

PM re 8 speed hub

Dibs Shimano PD-R540 road pedals. Will dm now

Can I have FSA Energy Compact 31.8mm narrow/small 380mm please? Happy to collect

I’ll take the stems if they’re still going - can meet next week

Dibs Deda Piega bars if you can post?

I’d take the Deda stem if available

If you fancy posting I'll take the inch carbon forks

Avid BB7 please, PM now.

Yup. Can you drop me a PM? Thanks...

Can you drop me a PM with your details? Cheers...

Erk. Well. Can do, can we discuss by PM? I'll need to know where they're headed of course... cheers

Of course. Drop me a PM?

Thanks for the interest all. I have responded to PMs in the order they arrived in my inbox (I've been on the hoof, so not keeping an eye on any dibs in the thread). And I've just responded to queries here.
From all of that, the following are in some way bagged:

Shimano bar-end shifters
Shimano IGH and shifter
Ritchey post
Tektro levers (black)
BB7s
SPD roadies
SRAM (or is it SCHRAM?) lever
On-One stem
Deda stem
...jeez all of the stems?
FSA bars
Deda Piega bars
Crab0n fr0k and CC headset

Hey there... can you drop me a PM? Cheers...

Yep

Can you confirm what's left? I would take the 1inch carbon fork, tektro levers, 9 speed bar end shifters and the 540 pedals..