FS: Cannondale CAAD12 Disc 50cm, dura ace, Roval carbon wheels - recently serviced

Was my girlfriends training bike, but its not seen any miles in the last year. Its a 50cm CAAD12 disc with full stack available, steerer has not been cut.

Really really nice bike, weighs in at just under 7.7kg so makes a perfect crit bike or alloy training bike.
We built this bike from the frame up and changed a few things along the way.

Starting with the wheels. They are Roval rapide CL40 wheels, we had the rear hub rebuilt by Strada wheels with a halo RD2 supa-drive hub to accommodate non SCS bikes and also the original hub got all corroded and horrible. The front hub still has the Carbon ceramicspeed/roval hub. These wheels are not tubeless ready, this was built before tubeless was cool.

The drive chain is all Dura ace 9000 11 speed, cranks are 50/34 with 170mm crank arms to suit smaller riders. Dura ace rear mech means only up to 28t cassette is allowed. I have both an ultegra cassette and a dura ace cassette to be included with the bike, both 11-28. The only part of the gear set which is not dura ace are the shifters which are ST-685 1st generation hydraulic STI levers which were basically dura ace mechanical at the time when they were brought out, though I would say they look closer to Ultegra.

The bike is currently running 160mm rotor on the front and 140mm rotor on the back, you can run 140/140 or 160/160 and I probably have some spare rotors if you would prefer either.

Brakes have just been bled and are working really well, the bike has had new polymer cables throughout, new BB bearings and a good clean up and a final 100k test ride to make sure its all working as it should be.

There are some small marks to the frame, no dents or dings. The only ones I could really capture with pictures were 2 small rub marks on the inside of the seat stays where the mudguards had been rattling against the frame. To be clear, the bike does not have mounts for full mudguards, we used sks clip on mudguards which worked really well.
Finally we have FSA SLK stem and carbon seatpost, and specialized shallow 38cm handlebars with fresh tape which matches the frame nicely. The saddle is specialized power saddle 155mm wide.

The bike has been ridden by my girlfriend who is 5ft 4 and she is really comfortable with it, we have just been riding offroad more than road and we're running out of space (my clearout is coming soon....).

We are looking for £1300 ono for the whole bike with spare winter tyres and dura ace cassette. I can post at a cost, otherwise collection can be made from Richmond SW london.

Any questions please ask

5 Attachments

more pics

5 Attachments

And the last two

2 Attachments

Price dropped to £1200 ono

Sigma sport car pack ;-(( I spend to much time there

not what you want to hear but i'd be interested in the slk seatpost + stem

Hello mate, not looking to split it just yet.. but I will let you know! Not sure if I have a other post for this bike.

Cheers

Andre

Hey
I actually found something that will do. Best to keep the better kit for yourself. Good luck !

Going on ebay tonight if there are no other interested parties!

What size stem is currently on it?

Also could you possibly measure the saddle to BB height as pictured and the tip of saddle to top of hood distances?

My girlfriend is 5ft 3 so just want to see how it compares to her current bike.

Ta

Hello,

I'll get these measurements for you tomorrow morning, the current stem is 110mm. What saddle height does your girlfriend ride? I can set it to that height to get more accurate reach measurements.

Cheers,

Andre

Thanks Andre,

We're just in Ham so would be easy to have a look if measurements stack up.

She currently has the saddle 689mm from middle of the BB.

Thanks again

Hi There, is this still available?