I was having problems with my chainline, so decided to go back to a Sugino 75 bottom bracket. Turns out that the Phil cartridge was trashed, so I'm selling the cups and the Phil BB tool.
Cups are fine (signs of fitting, but threads are good (etc). Tool was bought specifically to get this BB out.
£35 posted.
The BB cartridge is a mess - the shell is visibly corroded, the bearings are so-so. The tapers are fine, although there is a small mark at one end of a spindle from being dropped on the floor. I can't imagine it would affect the installation of a crank arm though.
BB is 108mm ISO, so their equivalent of NJS spec. Free with the cups if wanted.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
Create headers by underlining text with ==== or ----
To *italicise* text put one asterisk each side of the word
To **bold** text put two asterisks each side of the word
Embed images by entering: ![](https://www.google.co.uk/images/srpr/logo4w.png) That's the hard one: exclamation, square brackets and then the URL to the image in brackets.
* Create lists by starting lines with asterisks
1. Create numbered lists by starting lines with a number and a dot
> Quote text by starting lines with >
Mention another user by @username
For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block.
If you upload more than 5 files we will display all attachments as thumbnails.
I was having problems with my chainline, so decided to go back to a Sugino 75 bottom bracket. Turns out that the Phil cartridge was trashed, so I'm selling the cups and the Phil BB tool.
Cups are fine (signs of fitting, but threads are good (etc). Tool was bought specifically to get this BB out.
£35 posted.
The BB cartridge is a mess - the shell is visibly corroded, the bearings are so-so. The tapers are fine, although there is a small mark at one end of a spindle from being dropped on the floor. I can't imagine it would affect the installation of a crank arm though.
BB is 108mm ISO, so their equivalent of NJS spec. Free with the cups if wanted.
1 Attachment