SOLD Titanium Disc Forks with tapered steerer / PM brake mount / 880g / 203mm Ti steerer / AC 485mm / 40mm Offset - £75 - SOLD

SOLD SOLD SOLD

Hi all,

This is most likely to be of interest for @amey since a) he's back on disc brakes, b) he's always in Buyer Mode...

This was purchased used from eBay and test fitted on a Pinnacle city bike I was building about 18 months ago. the axle to crown was too long and skewed the geo so never actually rode them.

This would be good on a mountain bike or a gravel bike / hybrid / custom frame perhaps.

Titanium MTB fork

• Material:3Al/2.5V titanium - most likely made in China / Far East
  
• Size:29"/ 700c / 27.5" / 26"
  
• Steerer: tapered, cut down to 203mm, star nut fitted. Stamped WTLF16139
  
• Axcle to crown: 485mm
  
• Rake / Offset: 40mm
  
• 10mm QR axle / 100mm spacing
  
• PM disc brake tabs
  
• Weight:880g
  
• No bosses for mudguards or racks
  All measurements above done by me, I do not have the factory spec
  
  

I think that's pretty much it, these are around £200 on eBay/Aliexpress but I only paid SOLD £75 for them myself so would like to recoup the same amount.

Pick up from New Cross Gate or can meet in The City.

Vince

SOLD SOLD SOLD

5 Attachments

this is actually pretty cool .. if only it had about a million more braze ons :)

tapered steerer too!

f only it had about a million more braze ons :)

That's my go-to person for Ti welding:

Dave Baillie
Vernon Barker Cycles
http://www.vernonbarkercycles.co.uk
07579001966

I have a selection of 1" 1/8 Titanium spacers.

Happy to include one or two with the sale - I will try eBay next week if I can't sell on here as they appear to go for around £100-£125 used.

interested, potential dibs, whats the steerer tapered tube measurement exactly?

Dibs!

That's the spirit!

@Hulsroy is the only one has "dibsed".

I also have @MattG87 interested via PM.

I now live in New Cross Gate, off The Old Kent Road, next to Hong Kong City so please pop down to see it in the flesh.

I am really sorry but I have to undibs this I am afraid. Slight toooo short steerer for me.

I will measure exactly but expect standard 1.5" tapered steerer measurements.

1.125x1.5 Fork Steerer
Crown race diameter = 39.88mm (1.570")

I'm out, wrong size

Last man standing is @MattG87 !

damn wish this was thru axel

Sold on eBay for £95.

1 Attachment