FS: Cannondale Hollowgram SI crankset Spidering 52t 170mm

Got a set of hollowgrams I bought on here for my CAAD7 but never got around to using.
109mm axle
Paid 165, after 150 for them.
Teeth look in very good condition
The only thing to note is the thread for crank puller is slightly chewed. I reckon the cannondale crank puller will still go on fine but don’t have one to test. This would only ever be a problem when removing from the frame as it’s not the same thread that the crank actually bolts together with. I think you could always just use the puller on the other side to take the other arm off the axle anyway so really not an issue. Like I said, might still work fine anyway though, just want to be transparent about condition. Tried to photograph the thread but doesn’t show too well.

£150 please

.

3 Attachments

So fancy

What would I need for this to work with my CAAD12 (2018)?

Just some sisl spacers I think

Ask @Howard

And £150

a set of spacers indeed. i have spares

Assuming it's the 109mm axle, the wavy washer and .5mm spacers come with it, and your frame doesn't have some goofy adapter stuck in it, then you'd just need the drive and non drive side spacers. Think they are 2.5mm and 5mm but can't remember exactly.

Wait. C12 is BB30a, so the non drive side spacer is like 1.5mm or something

More pictures of the crank removal thread.
Again, this is not the thread that holds the cranks together so for fitting and using, it is unnafected.
Price drop to £140

2 Attachments