Single speed parts: Nitto/Cinelli/Miche/Specialized etc UPDATED 2/8

 A single speed project is no longer to go ahead, so I'm selling the parts I'd intended to use. Dibs followed up by PM, please. Will possibly post, but priority goes to people able to collect. Collection only from Hendon, NW4- sorry, I don't travel through central for a drop-off. And you will need to look at the thread replies to find out what's already sold or dibsed, or where dibs is cancelled.
UPDATED 12/4/17
UPDATED 28/5/17
UPDATED 6/6/17
FINAL PRICE DROP UPDATE 26/6/17
FINAL NEW PARTS UPDATE 2/8/17: see end of list

Andel track chainset with unbranded 3/32" 52t chainring. This chainset's cranks are the single speed only type, with no ledges on the reverse side of the spider to secure an inner chainring. Threads and tapers all fine. The cranks do show a couple of nicks though, but no heelrub. Arm length is 170mm, BCD is 144. The chainring has been rerecently added, and has minimal wear to the teeth I can see. 
Andel sell this chainset on their website, so it's a current model. I saw one example sell on the 'bay for £60+ recently- this one did have the original and track sized chainring though (and was in slightly better condition) so I'm selling mine for £20.

Charge bullhorns and stem. I assume both are Charge since they were on the same bike together, but can't be 100% certain of the stem with it not having Charge marked on it anywhere. Both are 26mm clamp size fitting. Bars are 34cm width c to c, and the stem's length is 11.5cm c to c. The bars show obvious stem clamping marks as well a few light scuffs to the paint but no zigzagging. There is also a scrape on the far left hand side but apart from that there's only tape residue marks. The stem is very new looking, only showing light scuffs along one side of the face plate. All threads are good. Bars £8> £6> £5, stem £5> £3> £2.

Tektro crosstop brake levers. Standard clamp size (24mm?) for non centre bulge fitment ie where the centre bulge doesn't extend the few cm outwards on either side of where the stem clamps. Will fit the above Charge bars. Threads are fine and the cable tension adjusters aren't seized. £6

Vavert security skewer and seatpost clamp. New. Skewer is the one for the rear wheel, front not included. Both unlock with an allen key. £2.

Continental valve extensions. New. For use with deep rim wheels and only fit Conti inner tubes or tubs which have valves with removable cores ie you can't use these as you would standard valve extensions. £3.

Shimano RO77 road shoes. Size 43 or 8 1/2. Virtually unused, just slight stuffing around the toe areas, rubber sole grips still shows all the tread. Takes SL or SPD cleats. £10> £8> £7.

Ritchey 650c rim tapes and Madison reflective bands. New. Rim tapes ideal for your lo pro builds etc. They're the snap-on plastic type, not cloth/stick-on etc. Width for road bike wheels. Madison reflectors are ankle/arm fitting.
all are pairs, £3> £2 a pair/packet of reflectors, and £2> £1.50 for a pair/packet of tapes.

Nitto B267 riser bars
A pair of Nitto oversized riser bars. These are in excellent condition, having had only minimal use. The only quibbles are the reduced shininess where the stem clamp has been, and that the red Nitto band usually near the left grip is missing. I can include a freebie pair of basic grips, if they're wanted. Length 52cm. These bars are £50 in the shops- my price:
£25> £22.

Cinelli Pista track stem
A Cinelli track ahead stem to fit oversized bars. It's in excellent condition, only having a small graze on the back of one of the steerer clamp bolt sockets. And the red paint infill of the front embossed 'flying C' logo has flaked off.
£10> £8.

Miche X-Press track wheel rim
A Miche rim off a Miche track wheel with broken hub. It had had very little use before the wheel was unlaced, so the rim is true and circular. The wheel was also used brakeless, so the braking surface is untouched. It's a 32 hole rim.
£12> £10.

Suntour Superbe Pro NJS cog
A Suntour Superbe Pro 1/8" NJS cog with 15 teeth. This is a less common NJS cog being a Suntour one (in comparison to the DA one out there) and is also a little unusual in not being the generic black/silver these cogs are nearly always coloured, as it's an attractive bronzey/dark brown colour. The anodizing has begun to fade around the base of the teeth, but the metal itself is untouched. Threads are British and are good.
£7> £6.

UPDATE PARTS:

Specialized track pedals
An 80's set of track pedals. Although Specialized branded, I believe these to be made by MKS (just as how a Specialized same era touring set are). Nice quality pedals and the bearings are still buttery smooth with no play, despite their clearly having had some good use over the years. All threads are good.
These are also pretty rare so my asking price is £20.

Syntace Duralite flat bars
Fairly modern flat bars with slight swayback. Cut down to just over 40cm. Clamp size is 25.4mm. A few light scratches and the logos show some fading. Very light bars.
£5

Cannondale cross top brake levers
Modern cross top levers. Condition near excellent, just some rust on the clamping bolts. Tension adjusters aren't seized. Fit standard 22mm diameter bars. Would fit the above ones:)
£6

NB see my other thread (https://www.lfgss.com/conversations/305480/#comment13659319) for some bike bits of the more unusual kind:)

Dibs on the levers, PM coming etc. etc.

Sent a pm for the skewers

Skewer set sold!
More parts to be added soon, watch this space...

Tektro levers sold!

Shimano shoes added.

I'll take the valve extenders.

Dibs the Andel chainset. PMing.

Pm me and we can take it from there.

Andel chainset sold!
A few misc items added above.

Valve extenders sold!

A few more bits added.

Suntour track cog added. I also have a set of Cannondale cross-top levers somewhere- I can dig them out if there's any interest?

Update: price drops for the the bits listed from the time the thread was begun.
And I forgot to mention that I'll be making a forum donation following my selling the majority of stuff here (now that everything's finally listed).

Half - dibs (?!) Andel cranks, pending incoming PM.

Edit - just seen they've sold 😥

Hey folks: I realise my recent price drops may have you excited, but please calm down and remember to check dibs/sold replies to avoid disappointment like that above /\ :)

If you update the original thread it makes finding out what's gone much easier.

Well... The above chap seemed to have found out (without my help) quite easily. I think most forumers know how to look through a thread, the newbies have to learn sometime, and I also like the bumps:)

dibs on the Shimano RO77 road shoes

Above person who's dibbed on the Shimano shoes has apparently pulled out (without bothering to reply to my last message), so therefore they're available again.
And, connected to the above... I should now make clear that I will NOT be hand delivering or otherwise meeting up with buyers to sell them items:)

Final bump- there's still a fair amount of bits here that haven't sold yet, so will reluctantly have to transfer them across to Evilbay soon and deprive you forumers... so, final price drops made on everything- see the individual bits for what these are.

FINAL NEW PARTS UPDATE: added Specialized track pedals, a pair of cross top levers and some fixie bars. Nothing else to add now:)

Bumpums

Weekend bump.

What's still available? Any of the levers?