Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
For a full reference visit the Markdown syntax.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
So I was setting up the low limit on the above RD. Crank running osymetric rings. Chain on small ring and large sprocket. Get the adjustment done and final check. Spinning the cranks and the rear derailleur decides to move all the way outboard dropping the chain onto the small sprocket.
Ran it through tube and telling me there is an error. Updated the firmware. Tested the derailleur to see if it had gone into crash mode. Tested all connections and on another bike. Nothing.
Motor in the derailleur still seems to run when shifters are pressed but doesn't move.
Anyone have any ideas?