Wheelsets (Harry Rowland, Arup, 23MM Wheels), Chainsets (6700), Components (105/6700), Saddles (Fizik/Prologo)

Photos for all items should be below, along with pictures of wheels and close-ups to show rim wear. All photos are named properly so you can tell which is which in the close-ups... just hover the cursor over them. :)

RANDOM FACTOR

1. Schwalbe One - 23c - New in box - £12
   
2. Prologo Scratch 2 Nack 134 - Great carbon saddle in tip top nick, but doesn't suit my arse - £60
   
3. Fizik Kurve Bull – Not compatible with my arse. Superb condition, standard (aluminium?) rails, not carbon - £60
   
4. Schwalbe Pro One - 28c - This has been patched a couple of times from the inside due to punctures which wouldn't seal with tubeless goo. Tread has plenty of life left. - £10
   
5. 2 x Schwalbe Durano Plus - 25c - Used for a few commutes/club rides, didn't get on with them, so have loads of life left - £11.50 each - £20 for the pair
   
6. 2 x Maxxis Padrone TR 25c - Tubeless tyres, barely used – £22 each, £40 for the pair
   
7. 2x Deda Zero 100 stems - both 140mm - one black, one silver, great condition - £20 each
   
   

WHEELSETS - all are standard road spacing, Shimano freehub and QR unless stated

1. PAIR Mavic Open Pro (black)/36h/Sapim Race (silver)/Miche Racing Box (silver)/ - Built by Harry Rowland - £95
   Rear recently retrued by Harry – and has very little mileage on it. Bit of notching on the freehub which has been filed down, but both wheels are in great condition, very little braking wear on the rear and the front is looking very healthy too. Pics below.

2. PAIR Archetype/32h/DT Alpine III/Miche Racing Box/ spokes - Built by Arup -
   £50
   Front: 1220g w/ 25c Schwalbe One/tube
   Rear: 1352g w/ 25c Schwalbe One/tube
   Shimano freehub. Bit of wear on both braking tracks but plenty of life left (see photos). While cleaning them I noticed that the rear rim seems to have paint lifting around some of the spoke holes - looks like it could be the beginning of cracks, so have priced accordingly.

3. PAIR Miche Primato (black)/DT R460 (black)/32h/Sapim Race (black) - Built by Mike Conway/23MM Wheels - £100
   Front: 1134g (w/ 25c Maxxis Padrone TR)
   Rear: 1713g (w/ 25c Maxxis Padrone TR & 12-30 HG50 10spd cassette)
   Barely used. Tubeless tape already installed, but only one tubeless valve supplied.

4. FRONT Rigida DP18/Ultegra 6700/32h/Sapim Leader (I think) - Built by Harry Rowland - *£15
   Front: 1354g w/ 25c Pro 4 Endurance
   Fair bit of wear on brake track (see photos), but bearings smooth and the wheel is bombproof. Perfect for beater/fixie use. Michelin Pro 4 Endurance doesn't look too knackered either, so I'll leave that on.

5. REAR Archetype/Ultegra 6700/32h/DT Alpine III - Built by Arup - PROVISIONALLY SOLD
   Rim is TOAST. Cracked. Hub was tad rumbly from what I remember, even after a bearing change, but it kept on trucking until the brake track went pop. Spokes are fine though, so I suspect a new rim and a little time could turn this into a respectable beater rear wheel.

COMPONENTS
Ultegra 6750 175mm chainset - 50/34 - Big ring is probably on its last legs; bit of scuffing on arms, but looking good otherwise - £50
Ultegra 6700 145mm chainset - 53/39 - Shortened to 145mm by Mike Burrows; Great condition - £70
Ultegra 6700 rear mech - Short cage - £20
Good nick and has some blingy Token red jockey wheels. Have the original jockey wheels if people want them.
Shimano 105 5700 Front mech - Band-on - £10
Ultegra 6700 triple Front mech - Band on - £15
Shimano 6700 brake calipers - pair for £35 - £20 each -Very good condition. Come with Swisstop FlashPro pads.

RANDOM STUFFS
Bontrager Race Lite 80mm 17degree rise stem - £SOLD
Deda seatpost 30.9mm - Gouges on rear from shitty seatclamp slipping - £3
Deda Zero 100 27.2mm 350mm - Logos coming off and anodising worn as seen in photos - £5
Giant Connect 120mm stem - £4 - New
Sunline V1 50mm stem - £18 - Gorgeous downhill MTB stem; too short for me so only used once, would make a lovely beefcake fixie stem; 220g apparently
Charge Spoon saddle in white - logos wearing away, but no rips and lots of life left - £SOLD
Felt F85 2014 stock saddle - white and black/blue logo - hardly used - £3

FORKS

1. Deda RS - £10 - 1 1/8in to 1.5in taper - Few scratches and scrapes from a bit of a lie down, but fine otherwise
   
2. Felt FA - £10 - same taper as above - Just a bit grubby
   
   

SOLD ITEMS

1. PAIR DT Swiss 350/Pacenti SL23 v1 (old rim version NOT new v2) - SOLD SOLD SOLD
   Shimano BR650 long drop brake caliper - SOLD SOLD SOLD SOLD SOLD
   Shimano 6800 brake caliper - SOLD SOLD SOLD
   Shimano 105 5700 STI - SOLD SOLD SOLD
   
2. PAIR Ambrosio Zenith aka Novatec 171/272 hubs(silver)/H Plus TB14 rims(black)/32h/Sapim spokes (silver) - Built by DCR Wheels - £110 SOLDSOLDSOLD
   
   

Sensible offers welcome. Collection preferred (TCR London or Plumstead) but will post to UK addresses if prodded with pointy stick.

10 Attachments

Provisional dibs - PM incoming

Sold pending photo approval etc...

Very nice wheels

Bump - I've had to pass on these, but someone should snap them up as a bargain!

I'd be interested in seeing some pictures!

Cheers,
Matt

....

again @Hovis @dubtap and the rest who were betrayed by CRC

Thanks @amey , I've splurged on some Hunt wheels now, should be with me soon.

£190

Argh! are these 'better' than Hope Mono RS on Archetypes?
Tempted...

Posted ?

I'd rather not post for now but i'll reconsider if they don't disappear in the next week or so. :)

@mattyc I've had several sets of Archetypes which are lovely and stiff (even if the brake track wears far faster than I'd like), but I was tempted by this Superstar SL23 build as the rims were regarded as being fairly similar to the Archetypes. FWIW My existing wheelsets were on Miche RG2 and I was getting a bit tired of destroying the freehubs/pawls and DT 350 were recommended highly as being tougher for big heavy 17 stone lumps like me.

Argh! are these 'better' than Hope Mono RS on Archetypes?

yes, british engineering vs swiss

Ok
Cheers

I am interested. How much do they weigh? Also, can they be run tubeless in v1 or is that only v2?

Also interested in the weight please...
Cheers,
Matt

£180 and I'll take them. I work on Gt Portland St.

Tubeless is a yes - I'll weigh em tomorrow...

And think I'll hold out for 190 for now, but thank you for the offer!

front: 856g
rear: 973g
total: 1.83 kg

@mattyc ^^ :)

Price drop to £188.88

I'll take them if you can post them

How are these still not sold?!

Hey @MRI. - just saw this. I'll see what the postage/overnight courier would cost on Monday and get back to you... Sure, I'd rather just hand them over to someone, but I'd also rather someone got some use out of them! :)