WTD: 700c wheels 100old front 126old rear

To fit 5 speed...must be new or mint

Hi
126 is generally the OLD for 6 speed hubs.

If you don't find a wheelset I have a couple of nice rear hubs @126mm, been meaning to get rid of them. A used Campagnolo Record low-flange (prob early 70s) that will be cheap, a Royce with original skewer (used but in lovely condition, early 80s) that will be medium cheap and a NOS bolt-on Phil one that's going to be pretty expensive. All of them are 36h as I recall.

I don't have any front hubs that match these.

Happy hunting.

I have a 6 speed clincher wheelset with tyres and 6 speed freewheel that you can have cheap. Should work perfectly.
I'll check them over if you're interested.
Si

hi si will you send me pics please

Yes I will check over inc measurements etc and send you pics before lunch.

Hi,
Condition is good - some brake wear to front Mavic SUP. Rear (Mavic open 4) is mainly black from pads that will clean off. Both wheels need a good clean as they have dried grease on them etc but should clean up beautifully. Hubs are the excellent Shimano 105. Shimano 6 speed freewheel. Continental Super sport 700x20 tyres and tubes -again old but hold air and look good.
Both rims have same colour and profile.
As I said needs a good clean as just been unused for ages. I do have a skewer for front.
Rear is 126.
If you can collect from High Barnet (Northern Line) you can have them for £75.
Si

5 Attachments